Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-INLINE-EJEKTTOREN SLP
Inline ejectors »SLP«, plug connection
Product image
Properties
| Properties |
Vacuum generator with high maximum vacuum level (85% vacuum) No moving parts, which means no wear and no maintenance ultra small footprint, suitable for confined spaces minimal air consumption low noise |
| Application |
by screwing / plugging into the distribution beam direct attachment to the suction pad for handling various workpieces |
| Housing |
plastic (Typ SLP) |
| Nozzle system |
Brass (type VR) |
| Connection |
thread connector |
Description
For vacuum generation directly at the point of use. For direct installation between the suction pad and the compressed air supply. Purely pneumatic vacuum generator that operates on the Venturi principle. Compressed air enters the ejector and flows through a nozzle. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet. This air and the driving air leave the ejector and enter the atmosphere via the exhaust air outlet.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Nozzlesize | Exhaustair outlet | Pneumatic connection | Vacuum inlet | degree of evacuation | air consumption suction (L/min) |
max. suction capacity (L/min) |
Length (mm) |
Operating pressure (bar) |
|---|---|---|---|---|---|---|---|---|---|
| K- 07 45 01 27 | 0,5 | - | 4 mm | 4 mm | 85 % | 13,0 | 8,0 | 57,0 | 4,5 |
| K- 07 45 01 28 | 0,7 | - | 4 mm | 4 mm | 85 % | 25,0 | 16,0 | 57,0 | 4,5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.