Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-L-AGR-K OR DRH VA
Male run tees, conical male thread acc. to ISO 7-1, stainless steel
Product image
Properties
| Pressure range |
Max. 25 bar |
| Recommended hoses |
PTFE hose |
| Temp. range |
-40 °C to +200 °C (depending on the hose quality and diameter) |
| Material |
Stainless steel 1.4404 |
| Seal |
Pure metal |
Description
Supplied without seals. For use with corrosive media and at high temperatures. Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential. The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | for hose | L1 (mm) |
L2 (mm) |
AF1 (mm) |
AF2 (mm) |
|---|---|---|---|---|---|---|
| K- 07 40 30 51 | R 1/8 | 6 mm / 4 mm | 23,0 | 40,0 | 12 | 10 |
| K- 07 40 30 52 | R 1/8 | 8 mm / 6 mm | 23,0 | 40,0 | 14 | 10 |
| K- 07 40 30 49 | R 1/4 | 6 mm / 4 mm | 23,0 | 44,5 | 12 | 10 |
| K- 07 40 30 50 | R 1/4 | 8 mm / 6 mm | 23,0 | 44,5 | 14 | 10 |
| K- 07 40 30 48 | R 1/4 | 10 mm / 8 mm | 26,0 | 47,5 | 16 | 12 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.