K-NIPPEL KUPPL STREAM LINE
Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel »stream line«Product image
Properties
Operating pressure |
Max. 16 bar |
Flow rate air |
2.100 l/min (at 6 bar and Δp = 0.5 bar) |
Media temperature |
-20 °C to +100 °C |
Material |
hardened zinc plated steel |
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Designation | AF (mm) |
---|---|---|
K- 07 35 12 92 | Plug for hose 10x6,5 | 16 |
K- 07 35 12 93 | Plug for hoseh 12x8 | 19 |
K- 07 35 12 94 | Plug for hose 13,5x9,5 | 21 |
K- 07 35 00 61 | Plug for hose 16x11 | 24 |
Additional element for following products
- K-SVKM NW 7,6 AG ST-MS VZ
- Quick disconnect couplings DN 7.6, galvanised steel / brass, male
- K-SVKM NW 7,6 IG ST
- Quick disconnect couplings DN 7.6, galvanised steel / nickel-plated brass, female
- K-SVKM NW 7,6 SCHL TUE ST VZ
- Quick disconnect couplings DN 7.6, galvanised steel / brass, with hose connector
- K-SVKM NW 7,6 STREAM LINE ST
- Quick disconnect couplings DN 7.6, galvanised steel / brass, »stream line«
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.