KOMP-LOS ELASTOMER
Elastomer expansion joints with loose-type flangesAdditional documents
Product image
Properties
Application |
Expansion joint for absorbing vibrations and noise |
Design |
Single corrugation bellows with steel, nylon or aramid pressure carrier inserts. attached protrusions to receive two-sided loose flanges |
Material |
Elastomer bellows Steel / stainless steel loose flanges |
Temp. range |
|
Note
Since these expansion joints are often not standard items, we refer customers to the variant selection on the expansion joint selection questionnaire (see additional documents).
With this information, of course we will then manufacture for you the expansion joint that is adapted perfectly to your needs.
Please follow the applicable installation guidelines for its expansion joint.
If you have any questions, please contact the metal hose business division.
Item
Ordering information
The delivery period depends to a large degree on the material and design of the expansion joint.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.