K-RUNDDUESE LAERMARME UN
Low-noise round nozzles, 1/2 - 27 UNS connectionProduct image
Description
If correctly designed, these noise-reducing nozzles guarantee a lower noise level than conventional one-hole types with an identical blowing force. They are usually fitted with a noise-reducing plastic insert and they are recommended by the German BGIA (Institute for Occupational Safety and Health).
Note
For noise, air consumption and blowing force values, see diagrams 1-17 in the technical information.
Item
Sort upwards
Sort downwards
Identification | Circuit diagram | Length (mm) |
Ø nozzles external (mm) |
Material | Diagram |
---|---|---|---|---|---|
K- 07 10 09 44 | 55,0 | 11 | Nickel-plated brass | 3 | |
K- 07 10 09 45 | 50,0 | 10 | Aluminium | 4 | |
K- 07 10 09 46 | 41,0 | 13 | Aluminium | 5 | |
K- 07 10 11 07 | 35,0 | 11 | Aluminium | 8 |
Accessory for following products
- K-H-LP TYPHOON SAFETY
- High-volume blow guns »Typhoon«, without nozzle, Safety
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.