Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-LP ALU O DUESE
Blow guns die-cast aluminium nickel-plated, without nozzle, Safety
Product image
Properties
| Operating pressure |
Max. 10 bar |
| Operating temperature |
-10 °C to +50 °C |
| Nozzles and extension nozzles |
Thread M12x1.25 |
Description
Standard type without nozzle! In combination with the safety nozzles described below, this blow gun meets a wide range of safety requirements. For blowing out and cleaning machines, workpieces, bore holes, hollow parts, etc.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | Connecting thread |
|---|---|---|
| K- 07 10 00 07 | Stem, I.D. 6 | G 1/4 |
| K- 07 10 00 10 | Stem, I.D. 9 | G 1/4 |
| K- 07 10 00 14 | Stem, I.D. 13 | G 1/4 |
| K- 07 10 00 18 | connection nipples for coupling NW 7,2 | G 1/4 |
Accessories
- K-ZUBEH LP ALU
- Accessories for standard blow guns (series 22)
- K-FEINSTRAHLDUE LAERMARME M
- Low-noise fine-spray nozzles, M12x1.25 connection
- K-RUNDDUESE LAERMARME M
- Low-noise round nozzles, M12x1.25 connection
- K-FLACHDUESE LAERMARME M
- Low-noise flat nozzles, M12x1.25 connection
- K-STANDARDDUESE
- Standard nozzle (short version) with Ø 1.5 mm bore
- K-DAEMPFERDUESE
- Silencer nozzle, M12x1.25 connection
- K-DUESE MIT SCHUTZSCHILD
- Nozzle with chip shield, M12x1.25 connection
- K-VERL DUESE
- Extension nozzles
- K-DRUCKREGULIERDUESE
- Regulating nozzle, M12x1,25, Safety
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.