Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-T-STECK VERS ASK DREH AG OR
Male branch tees with outer hex, swivel type, parallel male thread with O-ring
Product image
Properties
| Working pressure |
Max. 16 bar |
| Operating temperature |
-20 °C to +150 °C |
| Material |
Nickel-plated brass |
| Contact pressure ring |
Nickel-plated brass |
| O-ring |
FKM (FPM) |
| Clamping ring |
Stainless steel |
Description
Push-in fittings, manufactured entirely in nickel-plated brass. All parts with a parallel thread are supplied with an FPM O-ring.
All parts with conical threads are coated with preCOTE 5 dispersion, all fittings in this series can thus also be used at high temperatures (medium compressed air).
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | for external hose Ø | L1 (mm) |
L2 (mm) |
AF |
|---|---|---|---|---|---|
| K- 07 40 28 04 | G 1/8 | 4 mm | 42,0 | 28,0 | 14 mm |
| K- 07 40 28 05 | G 1/8 | 6 mm | 46,0 | 28,0 | 14 mm |
| K- 07 40 28 03 | G 1/4 | 6 mm | 48,0 | 33,0 | 17 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.