Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTST SAFETY BKR SCHA AN 2T MULTI
SAFETY service unit sets, comprising a ball valve with silencer, start-up valve and 2-piece service unit with lock cylinder
Product image
Properties
| Input pressure |
2 - 16 bar |
| Output pressure |
0.5 - 10 bar |
| Temp. range |
Max. 60 °C |
| Media |
Compressed air |
| Sealant |
NBR |
| Container |
Polycarbonate (with bayonet lock) and bowl guard |
| Spring bonnet |
POM |
| Filter element |
Cellpor (PE) 5 μm |
| Housing |
Die-cast zinc |
| Diaphragm |
NBR |
| Drain valve |
Semi-automatic |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| More information |
see data sheets of the individual components (on request) |
| connection venting ball valve |
Silencer |
Description
These compressed air service unit sets, comprising a ball valve with silencer, a start-up valve and one out of a pressure regulator, filter regulator or service unit, meet even the strictest requirements for operating reliability and accident prevention!
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
condensate outlet |
|---|---|---|---|---|---|---|
| K- 07 25 15 17 | G 1/4 | 1000 | 219,1 | 182.8 mm | 94,0 | Semi-automatic |
| K- 07 25 15 18 | G 1/2 | 3550 | 269,3 | 266.8 mm | 122,0 | Semi-automatic |
| K- 07 25 15 19 | G 1 | 9800 | 410,8 | 382.8 mm | 157,0 | Semi-automatic |
Ordering information
The price does not include a padlock. Please order separately. For accessories and spare parts, refer to individual components: ball valve, start-up valve, pressure regulator, filter regulator, 2-piece service unit.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.