LOET HJOF
Soldered socket ORFSProduct image
Properties
Connection 1 |
Soldered connection |
Connection 2 |
ORFS external threads |
Sealing form 2 |
flat seal with O-ring |
Design |
Soldered socket |
Construction |
straight |
Material |
Steel |
Surface |
oiled |
Item
Sort upwards
Sort downwards
Identification | Ø d (mm) |
G1 | AF (mm) |
OR |
---|---|---|---|---|
LOET 04 HJOF 06 | 6 | 9/16"-18 UNF | 17 | 7.65 x 1.78 |
LOET 04 HJOF 08 | 8 | 9/16"-18 UNF | 17 | 7.65 x 1.78 |
LOET 04 HJOF 10 | 10 | 9/16"-18 UNF | 17 | 7.65 x 1.78 |
LOET 06 HJOF 06 | 6 | 11/16" -16 UN | 19 | 9.25 x 1.78 |
LOET 06 HJOF 10 | 10 | 11/16" -16 UN | 19 | 9.25 x 1.78 |
LOET 06 HJOF 12 | 12 | 11/16" -16 UN | 19 | 9.25 x 1.78 |
LOET 08 HJOF 12 | 12 | 13/16" -16 UN | 22 | 12.42 x 1.78 |
LOET 08 HJOF 14 | 14 | 13/16" -16 UN | 22 | 12.42 x 1.78 |
LOET 08 HJOF 16 | 16 | 13/16" -16 UN | 22 | 12.42 x 1.78 |
LOET 10 HJOF 10 | 10 | 1" -14 UNS | 27 | 15.60 x 1.78 |
LOET 10 HJOF 16 | 16 | 1" -14 UNS | 27 | 15.60 x 1.78 |
LOET 10 HJOF 18 | 18 | 1" -14 UNS | 27 | 15.60 x 1.78 |
LOET 12 HJOF 18 | 18 | 1.3/16" -12 UN | 32 | 18.77 x 1.78 |
LOET 12 HJOF 20 | 20 | 1.3/16" -12 UN | 32 | 18.77 x 1.78 |
LOET 12 HJOF 22 | 22 | 1.3/16" -12 UN | 32 | 18.77 x 1.78 |
LOET 12 HJOF 25 | 25 | 1.3/16" -12 UN | 32 | 18.77 x 1.78 |
LOET 16 HJOF 16 | 16 | 1.7/16" -12 UN | 41 | 23.52 x 1.78 |
LOET 16 HJOF 25 | 25 | 1.7/16" -12 UN | 41 | 23.52 x 1.78 |
LOET 16 HJOF 28 | 28 | 1.7/16" -12 UN | 41 | 23.52 x 1.78 |
LOET 16 HJOF 32 | 32 | 1.7/16" -12 UN | 41 | 23.52 x 1.78 |
LOET 20 HJOF 32 | 32 | 1.11/16" -12 UN | 46 | 29.87 x 1.78 |
LOET 20 HJOF 35 | 35 | 1.11/16" -12 UN | 46 | 29.87 x 1.78 |
LOET 20 HJOF 38 | 38 | 1.11/16" -12 UN | 46 | 29.87 x 1.78 |
LOET 24 HJOF 38 | 38 | 2" -12 UN | 55 | 37.82 x 1.78 |
LOET 32 HJOF 30 | 30 | 2.1/2" -12 UN | 75 | 48.90 x 2.62 |
Ø d = External pipe diameter
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.