Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
NPSL
Combination element NPSL
Product image
Properties
| Design |
Rod wiper seal |
| Operating pressure |
up to 10 bar |
| Sliding speed max. |
1,0 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
90 °C |
| Media |
Mineral oils Water-air |
| Installation |
in open grooves B |
| Material |
NBR 75° Shore A |
| Application |
Pneumatics |
Description
Low-friction seal.
Combination element, seal/wiper.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
h (mm) |
H (mm) |
M (mm) |
A (mm) |
R (mm) |
|---|---|---|---|---|---|---|---|
| NPSL 16 26-7 | 16 | 26 | 7,0 | 9,5 | 28,00 | 8,50 | 1,10 |
| NPSL 18 26-6 | 18 | 26 | 6,0 | 8,5 | 28,00 | 7,50 | 1,10 |
| NPSL 20 30-7 | 20 | 30 | 7,0 | 9,5 | 32,00 | 8,80 | 1,40 |
| NPSL 22 32-7 | 22 | 32 | 7,0 | 9,5 | 34,50 | 8,80 | 1,40 |
| NPSL 25 35-7 | 25 | 35 | 7,0 | 9,5 | 37,50 | 8,80 | 1,40 |
| NPSL 30 40-7 | 30 | 40 | 7,0 | 9,5 | 42,50 | 8,80 | 1,40 |
| NPSL 32 42-7 | 32 | 42 | 7,0 | 9,5 | 44,50 | 8,80 | 1,40 |
| NPSL 40 50-7 | 40 | 50 | 7,0 | 9,5 | 52,50 | 8,80 | 1,40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.