Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PA 500 SF6 90 VA
Swage fitting, SFS angle 90°
Product image
Properties
| Application |
Swage fitting for HD 500 hoses |
| Connection 1 |
SAE flange connection 6000 PSI |
| Sealing form 1 |
flat seal with SF O-ring |
| Short code |
SFS |
| Standard |
SAE J518 ISO 6162-2 |
| Integration |
with pull-out protection (interlock) |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Stainless steel |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Flange size | D (mm) |
H (mm) |
L2 (mm) |
|---|---|---|---|---|---|---|---|
| PA 520 SF6 90 VA | 19 | 12 | 3/4" | 3/4" | 41,3 | 8,8 | 71,0 |
| PA 520 SF6 25 90 VA | 19 | 12 | 3/4" | 1" | 47,6 | 9,5 | 72,0 |
| PA 525 SF6 90 VA | 25 | 16 | 1" | 1" | 47,6 | 9,5 | 77,0 |
| PA 525 SF6 32 90 VA | 25 | 16 | 1" | 1.1/4" | 54,0 | 10,3 | 90,0 |
| PA 532 SF6 90 VA | 31 | 20 | 1.1/4" | 1.1/4" | 54,0 | 10,3 | 93,5 |
| PA 532 SF6 40 90 VA | 31 | 20 | 1.1/4" | 1.1/2" | 63,5 | 12,6 | 96,0 |
| PA 540 SF6 90 VA | 38 | 24 | 1.1/2" | 1.1/2" | 63,5 | 12,6 | 107,0 |
| PA 540 SF6 50 90 VA | 38 | 24 | 1.1/2" | 2" | 79,4 | 12,6 | 121,5 |
| PA 550 SF6 90 VA | 51 | 32 | 2" | 2" | 79,4 | 12,6 | 142,0 |
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- PA 500 SF6 90 A
- Swage fitting, SFS angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.