PA 600 AOB 90 VA
Swage fitting, DKOR angle 90°
Product image
![PA 600 AOB 90 VA PA 600 AOB 90 VA](/data/img/product/PA_500_AOS_90_VA.jpg)
![PA 600 AOB 90 VA - data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif - PA 600 AOB 90 VA](/data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif)
Properties
Application |
Swage fitting for HD 600 hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Short code |
DKOR |
Standard |
ISO 8434-6 BS 5200 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Stainless steel |
Item
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- PA 600 AOB 90
- Swage fitting, DKOR angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.