PA 700 AJF 45
Swage fitting, ORFS angle 45°Product image
Properties
Application |
Swage fitting for HD 400 hoses |
Connection 1 |
UN/UNF nut threads |
Sealing form 1 |
flat sealing |
Short code |
ORFS |
Standard |
ISO 8434-3 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
L2 (mm) |
S1 |
---|---|---|---|---|---|---|---|---|
PA 713 AJF 45 | 12 | 8 | 1/2" | 413,0 | 11/16" -16 UN | 91,5 | 21,5 | 27 |
PA 716 AJF 45 | 16 | 10 | 5/8" | 413,0 | 1" -14 UNS | 111,0 | 20,0 | 30 |
PA 720 AJF 45 | 19 | 12 | 3/4" | 413,0 | 1.3/16" -12 UN | 133,0 | 26,5 | 36 |
PA 725 AJF 45 | 25 | 16 | 1" | 413,0 | 1.7/16" -12 UN | 160,5 | 31,0 | 41 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.