PA 700 AOB 45
Swage fitting, DKOR angle 45°
Product image
![PA 700 AOB 45 PA 700 AOB 45](/data/img/product/PA_700_AOB_45.jpg)
![PA 700 AOB 45 - data/img/product/PA_xxx_AOS(AOB,AOL)_45_MEx.gif data/img/product/PA_xxx_AOS(AOB,AOL)_45_MEx.gif - PA 700 AOB 45](/data/img/product/PA_xxx_AOS(AOB,AOL)_45_MEx.gif)
Properties
Application |
Swage fitting for HD 400 hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Short code |
DKOR |
Standard |
ISO 8434-6 BS 5200 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
L2 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|---|
PA 713 AOB 45 | 12 | 8 | 1/2" | 420,0 | G 1/2" -14 | 91,5 | 20,0 | 27 | 12.1 x 1.6 |
PA 720 AOB 45 | 19 | 12 | 3/4" | 420,0 | G 3/4" -14 | 140,0 | 34,5 | 32 | 17.1 x 1.6 |
PA 725 AOB 45 | 25 | 16 | 1" | 420,0 | G 1" -11 | 169,5 | 39,0 | 41 | 22.1 x 1.6 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.