Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PA 800 AOS 90
Swage fitting, DKOS angle 90°
Product image
Properties
| Application |
Swage fitting for HD 800 hoses |
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Standard |
ISO 8434-1 |
| Short code |
DKOS |
| Integration |
with pull-out protection (interlock) |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Added innovative and unique new O-ring seal 27,3mm x 2,4mm (Material:EPDM)to the -20 size nipples. The O-ring design prevents fluid migration thus providing zero leakage as measured to SAE and EN specifications
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | G1 | for external pipe Ø (mm) |
L1 (mm) |
L2 (mm) |
S1 | Operating pressure (bar) |
OR |
|---|---|---|---|---|---|---|---|---|---|---|
| PA 816 AOS 90 | 16 | 10 | 5/8" | M 30 x 2 | 20 | 99,2 | 61,5 | 36 | 500,0 | 17.5 x 2.5 |
| PA 816 AOS 20 90 | 16 | 10 | 5/8" | M 36 x 2 | 25 | - | 65,0 | 46 | 500,0 | 20.0 x 2.5 |
| PA 820 AOS 16 90 | 19 | 12 | 3/4" | M 30 x 2 | 20 | 110,4 | 54,0 | 36 | 420,0 | 17.5 x 2.5 |
| PA 820 AOS 90 | 19 | 12 | 3/4" | M 36 x 2 | 25 | 124,8 | 65,0 | 46 | 500,0 | 20.0 x 2.5 |
| PA 825 AOS 20 90 | 25 | 16 | 1" | M 36 x 2 | 25 | 144,2 | 74,0 | 41 | 420,0 | 20.0 x 2.5 |
| PA 825 AOS 90 | 25 | 16 | 1" | M 42 x 2 | 30 | 155,6 | 76,0 | 50 | 500,0 | 25.0 x 2.5 |
| PA 832 AOS 90 | 31 | 20 | 1.1/4" | M 52 x 2 | 38 | 185,0 | 89,0 | 60 | 500,0 | 33.0 x 2.5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.