Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PAY 300 AN
Swage fitting, DKN
Product image
Properties
| Connection 1 |
NPT nut thread (NPSM) |
| Sealing form 1 |
60° outer cone |
| Short code |
DKN |
| Standard |
ANSI B 1.20.0 |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | G1 | L1 (mm) |
S1 |
|---|---|---|---|---|---|---|
| PAY 306 AN | 6 | 4 | 1/4" | 1/4" -18 NPT | 47,0 | 19 |
| PAY 308 AN 10 | 8 | 5 | 5/16" | 3/8" -18 NPT | 48,0 | 22 |
| PAY 310 AN | 10 | 6 | 3/8" | 3/8" -18 NPT | 50,0 | 22 |
| PAY 313 AN | 12 | 8 | 1/2" | 1/2" -14 NPT | 50,0 | 27 |
| PAY 316 AN 20 | 16 | 10 | 5/8" | 3/4" -14 NPT | 53,0 | 32 |
| PAY 320 AN | 19 | 12 | 3/4" | 3/4" -14 NPT | 59,0 | 32 |
| PAY 325 AN | 25 | 16 | 1" | 1" -11.5 NPT | - | - |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.