Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PAY 300 HN
Swage fitting, AGN
Product image
Properties
| Connection 1 |
NPT external threads |
| Sealing form 1 |
thread seal, additional 60° inner cone. |
| Short code |
AGN |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | G1 | L1 (mm) |
S1 |
|---|---|---|---|---|---|---|
| PAY 306 HN | 6 | 4 | 1/4" | 1/4" -18 NPT | 65,0 | 14 |
| PAY 306 HN 10 | 6 | 4 | 1/4" | 3/8" -18 NPT | - | - |
| PAY 310 HN | 10 | 6 | 3/8" | 3/8" -18 NPT | 71,0 | 19 |
| PAY 310 HN 13 | 10 | 6 | 3/8" | 1/2" -14 NPT | 76,0 | 22 |
| PAY 313 HN | 12 | 8 | 1/2" | 1/2" -14 NPT | 79,0 | 22 |
| PAY 320 HN | 19 | 12 | 3/4" | 3/4" -14 NPT | 91,0 | 27 |
| PAY 325 HN | 25 | 16 | 1" | 1" -11.5 NPT | 96,0 | 36 |
| PAY 325 HN 32 | 25 | 16 | 1" | 1.1/4" -11.5 NPT | 97,0 | 46 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.