PAY 500 HN
Product image
Properties
Connection 1 |
NPT external threads |
Sealing form 1 |
thread seal, additional 60° inner cone. |
Short code |
AGN |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | G1 | L1 (mm) |
S1 |
---|---|---|---|---|---|---|
PAY 506 HN | 6 | 4 | 1/4" | 1/4" -18 NPT | 61,5 | 15 |
PAY 506 HN 10 | 6 | 4 | 1/4" | 3/8" -18 NPT | 65,1 | 19 |
PAY 508 HN 10 | 8 | 5 | 5/16" | 3/8" -18 NPT | 68,0 | 19 |
PAY 510 HN | - | - | - | - | 72,1 | 19 |
PAY 513 HN | 12 | 8 | 1/2" | 1/2" -14 NPT | 84,5 | 24 |
PAY 520 HN | 19 | 12 | 3/4" | 3/4" -14 NPT | 95,5 | 27 |
PAY 525 HN | 25 | 16 | 1" | 1" -11.5 NPT | 106,0 | 36 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.