PN AOB 90
Swage nipple, DKOR angle 90°
Product image
![PN AOB 90 PN AOB 90](/data/img/product/PN_AOS_90.jpg)
![PN AOB 90 - data/img/product/PNxxAOL(AOB,AOS)90_MEx.gif data/img/product/PNxxAOL(AOB,AOS)90_MEx.gif - PN AOB 90](/data/img/product/PNxxAOL(AOB,AOS)90_MEx.gif)
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Short code |
DKOR |
Standard |
ISO 8434-6 BS 5200 |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
L2 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|---|
PN 06 AOB 90 | 6 | 4 | 1/4" | 400,0 | G 1/4" -19 | 55,0 | 27,0 | 19 | 6.0 x 1.0 |
PN 10 AOB 90 | 10 | 6 | 3/8" | 400,0 | G 3/8" -19 | 64,0 | 33,0 | 22 | 8.1 x 1.6 |
PN 13 AOB 90 | 12 | 8 | 1/2" | 350,0 | G 1/2" -14 | 72,5 | 38,0 | 27 | 12.1 x 1.6 |
PN 16 AOB 90 | 16 | 10 | 5/8" | 350,0 | G 5/8" -14 | 87,0 | 52,5 | 30 | 13.1 x 1.6 |
PN 20 AOB 90 | 19 | 12 | 3/4" | 315,0 | G 3/4" -14 | 99,0 | 58,0 | 32 | 17.1 x 1.6 |
PN 25 AOB 90 | 25 | 16 | 1" | 250,0 | G 1" -11 | 126,0 | 74,0 | 38 | 22.1 x 1.6 |
PN 25 AOB 32 90 | 25 | 16 | 1" | 250,0 | G 1.1/4" -11 | 127,0 | 69,5 | 50 | 29.1 x 1.6 |
PN 32 AOB 90 | 31 | 20 | 1.1/4" | 250,0 | G 1.1/4" -11 | 150,5 | 92,0 | 50 | 29.1 x 1.6 |
PN 32 AOB 40 90 | 31 | 20 | 1.1/4" | 210,0 | G 1.1/2" -11 | 150,5 | 91,5 | 55 | 35.1 x 1.6 |
PN 40 AOB 90 | 38 | 24 | 1.1/2" | 210,0 | G 1.1/2" -11 | 175,5 | 105,0 | 55 | 35.1 x 1.6 |
PN 40 AOB 50 90 | 38 | 24 | 1.1/4" | 210,0 | G 2" -11 | 175,5 | 105,0 | 70 | 48.1 x 1.6 |
PN 50 AOB 90 | 51 | 32 | 2" | 210,0 | G 2" -11 | 216,5 | 135,5 | 70 | 48.1 x 1.6 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.