Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DMO 45
Fitting, double nuts, angle 45°
Product image
Properties
| Connection 1 + 2 |
metric nut thread |
| Sealing form 1 + 2 |
24° outer cone with O-ring |
| Design |
Fitting, double nuts |
| Construction |
Angle 45° |
| Standard |
DIN 2353 ISO 8434-1 |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Operating pressure | Ø d (mm) |
G1 | L1 (mm) |
AF (mm) |
S1 | OR |
|---|---|---|---|---|---|---|---|---|
| DMO 45 NW 04 L | L | PN 400 | 6 | M 12 x 1.5 | 22,5 | 14 | 14 | 4.0 x 1.5 |
| DMO 45 NW 06 L | L | PN 400 | 8 | M 14 x 1.5 | 23,0 | 14 | 17 | 6.0 x 1.5 |
| DMO 45 NW 08 L | L | PN 400 | 10 | M 16 x 1.5 | 25,0 | 19 | 19 | 7.5 x 1.5 |
| DMO 45 NW 10 L | L | PN 400 | 12 | M 18 x 1.5 | 25,5 | 19 | 22 | 9.0 x 1.5 |
| DMO 45 NW 13 L | L | PN 400 | 15 | M 22 x 1.5 | 27,0 | 22 | 27 | 12.0 x 2.0 |
| DMO 45 NW 16 L | L | PN 315 | 18 | M 26 x 1.5 | 30,0 | 27 | 32 | 15.0 x 2.0 |
| DMO 45 NW 20 L | L | PN 315 | 22 | M 30 x 2 | 32,0 | 30 | 36 | 20.0 x 2.0 |
| DMO 45 NW 25 L | L | PN 250 | 28 | M 36 x 2 | 35,0 | 36 | 41 | 26.0 x 2.0 |
| DMO 45 NW 32 L | L | PN 250 | 35 | M 45 x 2 | 39,5 | 50 | 50 | 32.0 x 2.5 |
| DMO 45 NW 40 L | L | PN 250 | 42 | M 52 x 2 | 42,0 | 50 | 60 | 38.0 x 2.5 |
| DMO 45 NW 03 S | S | PN 630 | 6 | M 14 x 1.5 | 23,5 | 14 | 17 | 4.0 x 1.5 |
| DMO 45 NW 04 S | S | PN 630 | 8 | M 16 x 1.5 | 26,5 | 19 | 19 | 6.0 x 1.5 |
| DMO 45 NW 06 S | S | PN 630 | 10 | M 18 x 1.5 | 27,0 | 19 | 22 | 7.5 x 1.5 |
| DMO 45 NW 08 S | S | PN 630 | 12 | M 20 x 1.5 | 27,5 | 19 | 24 | 9.0 x 1.5 |
| DMO 45 NW 13 S | S | PN 400 | 16 | M 24 x 1.5 | 31,5 | 27 | 30 | 12.0 x 2.0 |
| DMO 45 NW 16 S | S | PN 400 | 20 | M 30 x 2 | 36,0 | 30 | 36 | 16.3 x 2.4 |
| DMO 45 NW 20 S | S | PN 400 | 25 | M 36 x 2 | 40,5 | 36 | 46 | 20.3 x 2.4 |
| DMO 45 NW 25 S | S | PN 400 | 30 | M 42 x 2 | 44,5 | 50 | 50 | 25.3 x 2.4 |
| DMO 45 NW 32 S | S | PN 315 | 38 | M 52 x 2 | 50,5 | 50 | 60 | 33.3 x 2.4 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d = External pipe diameter
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.