Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WB90 AOL
Connection socket, angle 90°
Product image
Properties
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Connection 2 |
metric nut thread |
| Sealing form 2 |
24° outer cone with O-ring |
| Design |
Connecting socket (short pipe bend) |
| Construction |
Angle 90° |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
Calculation pressure (bar) |
G1 + G2 | S1 | S2 | OR1 + OR2 |
|---|---|---|---|---|---|---|---|
| WB90 NW 04 AOL | L | 6 | 315 | M 12 x 1.5 | 14 | 14 | 4.0 x 1.5 |
| WB90 NW 06 AOL | L | 8 | 315 | M 14 x 1.5 | 17 | 17 | 6.0 x 1.5 |
| WB90 NW 08 AOL | L | 10 | 315 | M 16 x 1.5 | 19 | 19 | 7.5 x 1.5 |
| WB90 NW 10 AOL | L | 12 | 315 | M 18 x 1.5 | 22 | 22 | 9.0 x 1.5 |
| WB90 NW 13 AOL | L | 15 | 315 | M 22 x 1.5 | 27 | 27 | 12.0 x 2.0 |
| WB90 NW 16 AOL | L | 18 | 315 | M 26 x 1.5 | 32 | 32 | 15.0 x 2.0 |
| WB90 NW 20 AOL | L | 22 | 160 | M 30 x 2 | 36 | 36 | 20.0 x 2.0 |
| WB90 NW 25 AOL | L | 28 | 160 | M 36 x 2 | 41 | 41 | 26.0 x 2.0 |
| WB90 NW 32 AOL | L | 35 | 160 | M 45 x 2 | 50 | 50 | 32.0 x 2.5 |
| WB90 NW 40 AOL | L | 42 | 160 | M 52 x 2 | 60 | 60 | 38.0 x 2.5 |
Series: LL = Very light L = Light S = Heavy – SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.