Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TRK MG
Screw-in fitting, T shaped
Product image
Properties
| Connection 1 |
BSPT conical external threads |
| Sealing form 1 |
thread seal |
| Connection 2 + 3 |
metric cylindrical outer thread |
| Sealing form 2 + 3 |
24° inner cone |
| Design |
Screw-in fitting |
| Construction |
T shaped |
| Standard |
DIN 2353 ISO 8434-1 |
| Scope of supply |
Socket with union nut and cutting ring |
| Material |
Brass |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Operating pressure | External pipe Ø (mm) |
G | i (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
AF (mm) |
S3 |
|---|---|---|---|---|---|---|---|---|---|---|
| TR 06 LL MG | LL | PN 63 | 6 | R 1/8" K | 8 | 21 | 9,5 | 17 | 9 | 12 |
| TR NW 04 HL MG | L | PN 200 | 6 | R 1/8" K | 8 | 27 | 12,0 | 20 | 12 | 14 |
| TR NW 06 HL MG | L | PN 200 | 8 | R 1/4" K | 12 | 29 | 14,0 | 26 | 12 | 17 |
| TR NW 08 HL MG | L | PN 200 | 10 | R 1/4" K | 12 | 30 | 15,0 | 27 | 14 | 19 |
| TR NW 10 HL MG | L | PN 200 | 12 | R 3/8" K | 12 | 32 | 17,0 | 28 | 17 | 22 |
| TR NW 13 HL MG | L | PN 200 | 15 | R 1/2" K | 14 | 36 | 21,0 | 34 | 19 | 27 |
| TR NW 03 HS MG | S | PN 250 | 6 | R 1/4" K | 12 | 31 | 16,0 | 26 | 12 | 17 |
| TR NW 06 HS MG | S | PN 250 | 10 | R 3/8" K | 12 | 34 | 17,5 | 28 | 17 | 22 |
Ø = External pipe diameter – Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.