Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SFS
SAE flange seal SFS
Product image
Properties
| Operating pressure |
to 420 bar (6000PSI) |
| Colour |
yellow + black |
| Temp. min. |
-35 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils |
| Installation |
on SAE flange 3000 and 6000 PSI |
| Material |
1) Polyurethane 57 Shore A (2) Polyurethane 95 Shore A |
Description
Good extrusion resistance.
Long service life.
Easy assembly because the seal and flange adhere to each other.
Item
Sort upwards
Sort downwards
 Identification |
Flange size | D (mm) |
e (mm) |
B (mm) |
|---|---|---|---|---|
| SFS - 08 | 1/2" | 25,4 | 2,85 | 4,2 |
| SFS - 12 | 3/4" | 31,8 | 2,85 | 4,2 |
| SFS - 16 | 1" | 39,7 | 2,85 | 4,2 |
| SFS - 20 | 1.1/4" | 44,5 | 2,85 | 4,2 |
| SFS - 24 | 1.1/2" | 53,8 | 2,85 | 4,2 |
| SFS - 32 | 2" | 63,4 | 2,85 | 4,2 |
| SFS - 40 | 2.1/2" | 76,2 | 2,85 | 4,2 |
| SFS - 48 | 3" | 91,9 | 2,85 | 4,2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.