Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SI 200 RME
Fuel hose
Product image
Properties
| Application |
Low pressure hose for fuel lines |
| Special features |
antistatic inner and outer rubber |
| Inner layer |
NBR |
| Insert |
spiral synthetic textile threads |
| Outer layer |
BNBR/EPDM, smooth |
| Colour |
black |
| Temp. min. |
-30 °C |
| Temp. max. |
100 °C |
| Media |
Bio-diesel (B20) Diesel Petrol fuels Max. Temp. for fuel max. +70 °C |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Inches | Size | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| SI 206 RME | 6 | 1/4" | 4 | 6,0 | 13 | 10,0 | 30 | 55 |
| SI 208 RME | 8 | 5/16" | 5 | 7,5 | 14 | 10,0 | 30 | 65 |
| SI 210 RME | 10 | 3/8" | 6 | 10,0 | 16 | 10,0 | 30 | 75 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.