Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SWP
Wiper SWP
Product image
Properties
| Design |
Wipers |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
is pressed into an open groove |
| Design |
Metric |
| Material |
(1) Sleeve: Steel (2) Wiper: PUR |
| Application |
Hydraulics |
Description
Low spatial requirement.
High abrasion resistance.
For earth-moving equipment and difficult working conditions.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
|---|---|---|---|
| SWP 25 38 | 25,0 | 38,0 | 7,5 |
| SWP 30 40 | 30,0 | 40,0 | 4,0 |
| SWP 30 43 | 30,0 | 43,0 | 7,5 |
| SWP 35 45 | 35,0 | 45,0 | 4,0 |
| SWP 35 50 | 35,0 | 50,0 | 7,5 |
| SWP 36 48 | 36,0 | 48,0 | 6,0 |
| SWP 38 50 | 38,0 | 50,0 | 7,5 |
| SWP 40 50 | 40,0 | 50,0 | 4,0 |
| SWP 40 52 | 40,0 | 52,0 | 6,0 |
| SWP 45 55 | 45,0 | 55,0 | 4,0 |
| SWP 45 60 | 45,0 | 60,0 | 7,5 |
| SWP 50 60 | 50,0 | 60,0 | 4,0 |
| SWP 50 65 | 50,0 | 65,0 | 7,5 |
| SWP 55 65 | 55,0 | 65,0 | 3,2 |
| SWP 55 68 | 55,0 | 68,0 | 4,0 |
| SWP 55 70 | 55,0 | 70,0 | 7,5 |
| SWP 56 70 | 56,0 | 70,0 | 7,5 |
| SWP 60 70 | 60,0 | 70,0 | 7,0 |
| SWP 60 75-1 | 60,0 | 75,0 | 4,0 |
| SWP 60 75 | 60,0 | 75,0 | 7,5 |
| SWP 63 78 | 63,0 | 78,0 | 7,5 |
| SWP 65 80-1 | 65,0 | 80,0 | 5,0 |
| SWP 65 80 | 65,0 | 80,0 | 7,5 |
| SWP 70 80 | 70,0 | 80,0 | 5,0 |
| SWP 70 84 | 70,0 | 84,0 | 7,5 |
| SWP 70 85-1 | 70,0 | 85,0 | 4,0 |
| SWP 70 85 | 70,0 | 85,0 | 7,5 |
| SWP 71 86 | 71,0 | 86,0 | 5,0 |
| SWP 75 90 | 75,0 | 90,0 | 7,5 |
| SWP 75 95 | 75,0 | 95,0 | 10,0 |
| SWP 76 96 | 76,5 | 96,5 | 10,0 |
| SWP 80 94 | 80,0 | 94,0 | 8,0 |
| SWP 80 95-1 | 80,0 | 95,0 | 5,0 |
| SWP 80 95 | 80,0 | 95,0 | 7,5 |
| SWP 80 100 | 80,0 | 100,0 | 10,0 |
| SWP 85 100 | 85,0 | 100,0 | 10,0 |
| SWP 85 105 | 85,0 | 105,0 | 10,0 |
| SWP 90 104 | 90,0 | 104,0 | 8,0 |
| SWP 90 105 | 90,0 | 105,0 | 6,0 |
| SWP 90 110 | 90,0 | 110,0 | 10,0 |
| SWP 95 115 | 95,0 | 115,0 | 10,0 |
| SWP 100 115-2 | 100,0 | 115,0 | 4,0 |
| SWP 100 115-1 | 100,0 | 115,0 | 6,5 |
| SWP 100 115 | 100,0 | 115,0 | 7,5 |
| SWP 100 120 | 100,0 | 120,0 | 10,0 |
| SWP 105 120 | 105,0 | 120,0 | 7,5 |
| SWP 110 125 | 110,0 | 125,0 | 9,0 |
| SWP 110 130 | 110,0 | 130,0 | 10,0 |
| SWP 115 130 | 115,0 | 130,0 | 7,5 |
| SWP 120 140 | 120,0 | 140,0 | 10,0 |
| SWP 130 145 | 130,0 | 145,0 | 7,5 |
| SWP 160 175 | 160,0 | 175,0 | 10,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.