Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TDOP
Complete piston TDOP
Product image
Properties
| Design |
Complete pistons |
| Operating pressure |
up to 10 bar |
| Sliding speed max. |
1,0 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils Water-air |
| Installation |
push onto piston recess with the rubber side and affix with washer and nut. |
| Material |
NBR 85° Shore A, with steel core |
| Application |
Pneumatics |
Description
Complete pistons.
Note
Tolerance: D= H11; d= f8; E= +/-0.5
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
P (mm) |
E (mm) |
e (mm) |
|---|---|---|---|---|---|
| TDOP 25 | 25 | 8 | 15,6 | 12 | 3,8 |
| TDOP 32 | 32 | 8 | 20,0 | 15 | 3,8 |
| TDOP 40 | 40 | 10 | 27,0 | 18 | 4,8 |
| TDOP 50 | 50 | 10 | 37,0 | 18 | 4,8 |
| TDOP 60 | 60 | 12 | 43,0 | 22 | 6,0 |
| TDOP 63 | 63 | 12 | 43,0 | 22 | 6,0 |
| TDOP 063-1 | 63 | 16 | 43,0 | 22 | 6,0 |
| TDOP 65 | 65 | 12 | 43,0 | 25 | 6,0 |
| TDOP 70 | 70 | 12 | 50,0 | 25 | 6,0 |
| TDOP 80 | 80 | 16 | 55,0 | 24 | 6,0 |
| TDOP 100 | 100 | 20 | 75,0 | 26 | 7,0 |
| TDOP 125 | 125 | 20 | 95,0 | 26 | 9,6 |
| TDOP 160 | 160 | 27 | 129,0 | 30 | 10,8 |
| TDOP 200 | 200 | 27 | 169,0 | 35 | 11,4 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM, EPDM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.