Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TG S
Propellant hose
Product image
Properties
| Application |
Fuel gas systems in vehicles and mobile equipment e.g. industrial trucks |
| Standard |
DIN 4815 |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
one braided textile insert |
| Outer layer |
synthetic rubber |
| Colour |
black |
| Temp. min. |
-30 °C |
| Temp. max. |
85 °C |
| Approval |
meets the requirements of BGV D34 DVGW approval |
| Media |
Liquid gas |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Inches | Size | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
Roll length (m) |
|---|---|---|---|---|---|---|---|---|---|
| TG 306 S | 6 | 1/4" | 4 | 6,3 | 16,4 | 30,0 | 125 | 45 | 100 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.