UEM B
Union nut for flange connection
Product image


Properties
Connection 1 |
metric nut thread |
Design |
Union nut for flange connection |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item

Sort upwards
Sort downwards
![]() |
Series | Operating pressure | for external pipe Ø (mm) |
G1 | Ø d2 (mm) |
L1 (mm) |
AF (mm) |
---|---|---|---|---|---|---|---|
UEM NW 04 LB | L | PN 315 | 6 | M 12 x 1.5 | 7,7 | 18,0 | 14 |
UEM NW 06 LB | L | PN 315 | 8 | M 14 x 1.5 | 9,5 | 19,0 | 17 |
UEM NW 08 LB | L | PN 315 | 10 | M 16 x 1.5 | 11,7 | 20,5 | 19 |
UEM NW 10 LB | L | PN 315 | 12 | M 18 x 1.5 | 13,8 | 21,5 | 22 |
UEM NW 13 LB | L | PN 315 | 15 | M 22 x 1.5 | 17,7 | 24,0 | 27 |
UEM NW 16 LB | L | PN 315 | 18 | M 26 x 1.5 | 21,1 | 23,0 | 32 |
UEM NW 20 LB | L | PN 160 | 22 | M 30 x 2 | 24,3 | 27,5 | 36 |
UEM NW 25 LB | L | PN 160 | 28 | M 36 x 2 | 30,3 | 27,5 | 41 |
UEM NW 32 LB | L | PN 160 | 35 | M 45 x 2 | 38,2 | 30,0 | 50 |
UEM NW 40 LB | L | PN 160 | 42 | M 52 x 2 | 45,2 | 34,0 | 60 |
UEM NW 03 SB | S | PN 630 | 6 | M 14 x 1.5 | 7,7 | 19,0 | 17 |
UEM NW 04 SB | S | PN 630 | 8 | M 16 x 1.5 | 9,5 | 20,0 | 19 |
UEM NW 06 SB | S | PN 630 | 10 | M 18 x 1.5 | 11,7 | 21,5 | 22 |
UEM NW 08 SB | S | PN 630 | 12 | M 20 x 1.5 | 13,8 | 22,0 | 24 |
UEM NW 10 SB | S | PN 630 | 14 | M 22 x 1.5 | 17,7 | 24,0 | 27 |
UEM NW 13 SB | S | PN 400 | 16 | M 24 x 1.5 | 18,6 | 26,5 | 30 |
UEM NW 16 SB | S | PN 400 | 20 | M 30 x 2 | 24,3 | 27,5 | 36 |
UEM NW 20 SB | S | PN 400 | 25 | M 36 x 2 | 28,6 | 30,5 | 46 |
UEM NW 25 SB | S | PN 400 | 30 | M 42 x 2 | 34,1 | 32,0 | 50 |
UEM NW 32 SB | S | PN 315 | 38 | M 52 x 2 | 42,2 | 38,0 | 60 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure
Product versions

This product is also available in the following designs:
- UEM B VA
- Union nut for flange connection, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.