Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
VSH
Reinforcing sleeve for pipes
Product image
Properties
| Design |
Support bushes |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
for internal pipe Ø (mm) |
Ø D1 (mm) |
Ø d2 (mm) |
L1 (mm) |
|---|---|---|---|---|
| VSH 4 ID | 4,0 | 3,8 | 2,6 | 15,5 |
| VSH 04.5 ID | 4,5 | 4,3 | 3,1 | 14,0 |
| VSH 5 ID | 5,0 | 4,8 | 3,6 | 14,0 |
| VSH 6 ID | 6,0 | 5,8 | 4,6 | 15,5 |
| VSH 7 ID | 7,0 | 6,8 | 5,6 | 17,0 |
| VSH 8 ID | 8,0 | 7,8 | 6,6 | 16,5 |
| VSH 9 ID | 9,0 | 8,8 | 7,6 | 16,5 |
| VSH 10 ID | 10,0 | 9,8 | 8,6 | 16,5 |
| VSH 12 ID | 12,0 | 11,8 | 10,2 | 17,0 |
| VSH 13 ID | 13,0 | 12,8 | 11,2 | 17,0 |
| VSH 14 ID | 14,0 | 13,8 | 12,2 | 17,0 |
| VSH 15 ID | 15,0 | 14,8 | 13,2 | 17,5 |
| VSH 16 ID | 16,0 | 15,8 | 14,2 | 17,5 |
| VSH 17 ID | 17,0 | 16,8 | 15,2 | 18,0 |
| VSH 18 ID | 18,0 | 17,8 | 16,2 | 22,0 |
| VSH 19 ID | 19,0 | 18,8 | 17,2 | 18,0 |
| VSH 20 ID | 20,0 | 19,8 | 18,2 | 18,0 |
| VSH 21 ID | 21,0 | 20,8 | 19,2 | 20,0 |
| VSH 22 ID | 22,0 | 21,8 | 20,2 | 23,5 |
| VSH 24 ID | 24,0 | 23,8 | 22,2 | 18,0 |
| VSH 25 ID | 25,0 | 24,8 | 23,2 | 18,0 |
| VSH 26 ID | 26,0 | 25,8 | 24,2 | 21,0 |
| VSH 27 ID | 27,0 | 26,8 | 25,2 | 21,0 |
| VSH 30 ID | 30,0 | 29,8 | 27,2 | 21,0 |
| VSH 31 ID | 31,0 | 30,8 | 28,8 | 22,5 |
| VSH 32 ID | 32,0 | 31,8 | 29,2 | 22,5 |
| VSH 33 ID | 33,0 | 32,8 | 30,2 | 22,5 |
| VSH 38 ID | 38,0 | 37,8 | 35,8 | 23,5 |
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.