WA VC VA
Connector ... VC, VAProduct image
Properties
Application |
Connection fitting for metal hoses |
Connection 1 |
imperial outer thread, conical |
Sealing form 1 |
conical seat |
Standard |
DIN EN 10226 / ISO 7-1 |
Construction |
straight |
Design |
3-part threaded connection |
Material |
Stainless steel |
Note
Width across flats values are listed for reference purposes!
Item
Sort upwards
Sort downwards
Identification | DN | PN (bar) | G1 | S1 (mm) |
---|---|---|---|---|
WA 006 VC VA | 6 | 50 | R 1/4" | 27,0 |
WA 010 VC VA | 10 | 50 | R 3/8" | 32,0 |
WA 013 VC VA | 13 | 50 | R 1/2" | 41,0 |
WA 020 VC VA | 20 | 50 | R 3/4" | 50,0 |
WA 025 VC VA | 25 | 50 | R 1" | 55,0 |
WA 032 VC VA | 32 | 40 | R 1.1/4" | 70,0 |
WA 040 VC VA | 40 | 40 | R 1.1/2" | 75,0 |
WA 050 VC VA | 50 | 40 | R 2" | 90,0 |
WA 065 VC VA | 65 | 25 | R 2.1/2" | 110,0 |
WA 080 VC VA | 80 | 25 | R 3" | 130,0 |
Ordering information
Other designs available on request
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.