Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WB45 AOS
Connection socket, angle 45°
Product image
Properties
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Connection 2 |
metric nut thread |
| Sealing form 2 |
24° outer cone with O-ring |
| Design |
Connecting socket (short pipe bend) |
| Construction |
Angle 45° |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
Calculation pressure (bar) |
G1 + G2 | S1 | S2 | OR1 + OR2 |
|---|---|---|---|---|---|---|---|
| WB45 NW 03 AOS | S | 6 | 600 | M 14 x 1.5 | 17 | 17 | 4.0 x 1.5 |
| WB45 NW 04 AOS | S | 8 | 600 | M 16 x 1.5 | 19 | 19 | 6.0 x 1.5 |
| WB45 NW 06 AOS | S | 10 | 600 | M 18 x 1.5 | 22 | 22 | 7.5 x 1.5 |
| WB45 NW 08 AOS | S | 12 | 600 | M 20 x 1.5 | 24 | 24 | 9.0 x 1.5 |
| WB45 NW 10 AOS | S | 14 | 600 | M 22 x 1.5 | 27 | 27 | 10.0 x 2.0 |
| WB45 NW 13 AOS | S | 16 | 400 | M 24 x 1.5 | 30 | 30 | 12.0 x 2.0 |
| WB45 NW 16 AOS | S | 20 | 400 | M 30 x 2 | 36 | 36 | 16.3 x 2.4 |
| WB45 NW 20 AOS | S | 25 | 400 | M 36 x 2 | 46 | 46 | 20.3 x 2.4 |
| WB45 NW 25 AOS | S | 30 | 400 | M 42 x 2 | 50 | 50 | 25.3 x 2.4 |
| WB45 NW 32 AOS | S | 38 | 315 | M 52 x 2 | 60 | 60 | 33.2 x 2.4 |
Series: LL = Very light L = Light S = Heavy – SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.