WB45 AOS HS
Connection socket, angle 45°
Product image
![WB45 AOS HS WB45 AOS HS](/data/img/product/WB_45_AOL_HL_Foto_N.jpg)
![WB45 AOS HS - data/img/product/WB45_AOL_HL_MEx.gif data/img/product/WB45_AOL_HL_MEx.gif - WB45 AOS HS](/data/img/product/WB45_AOL_HL_MEx.gif)
Properties
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Connection 2 |
metric cylindrical outer thread |
Sealing form 2 |
24° inner cone |
Design |
Connecting socket (short pipe bend) |
Construction |
Angle 45° |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Series | External pipe Ø (mm) |
Calculation pressure (bar) |
G1 + G2 | S1 | S2 | OR |
---|---|---|---|---|---|---|---|
WB45 AOS 03 HS | S | 6 | 600 | M 14 x 1.5 | 17 | 14 | 4.0 x 1.5 |
WB45 AOS 04 HS | S | 8 | 600 | M 16 x 1.5 | 19 | 17 | 6.0 x 1.5 |
WB45 AOS 06 HS | S | 10 | 600 | M 18 x 1.5 | 22 | 19 | 7.5 x 1.5 |
WB45 AOS 08 HS | S | 12 | 600 | M 20 x 1.5 | 24 | 22 | 9.0 x 1.5 |
WB45 AOS 10 HS | S | 14 | 600 | M 22 x 1.5 | 27 | 22 | 10.0 x 2.0 |
WB45 AOS 13 HS | S | 16 | 400 | M 24 x 1.5 | 30 | 24 | 12.0 x 2.0 |
WB45 AOS 16 HS | S | 20 | 400 | M 30 x 2 | 36 | 30 | 16.3 x 2.4 |
WB45 AOS 20 HS | S | 25 | 400 | M 36 x 2 | 46 | 36 | 20.3 x 2.4 |
WB45 AOS 25 HS | S | 30 | 400 | M 42 x 2 | 50 | 46 | 25.3 x 2.4 |
WB45 AOS 32 HS | S | 38 | 315 | M 52 x 2 | 60 | 55 | 33.3 x 2.4 |
Series: LL = Very light L = Light S = Heavy – SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.