Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WFG JIC (6000 PSI)
SAE flange adapter, forged
Product image
Properties
| Pressure series |
6000 psi |
| Standard |
SAE J 518 C ISO 6162 |
| Construction type |
forged |
| Construction |
Angle 90° |
| Design |
SAE flange adapter |
| Scope of supply |
flange only |
| Material |
S355J2G3 (ST52.3) |
| Surface |
electro galvanised |
Note
The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
PB 10.9 (bar) |
Size | A | B1 (mm) |
B2 (mm) |
E (mm) |
F1 (mm) |
S1 (mm) |
S2 (mm) |
L (mm) |
M metr. | M unc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WFG 6001 JIC 3/4 | 400 | 1/2" | UNF 3/4" -16 | 9,9 | 13 | 18,2 | 61,6 | 39 | 38 | 8,7 | M 8 x 30 | 5/16" x 1.1/4" |
| WFG 6001 JIC 7/8 | 400 | 1/2" | UNF 7/8" -14 | 12,3 | 13 | 18,2 | 61,6 | 39 | 38 | 8,7 | M 8 x 35 | 5/16" x 1.1/4" |
| WFG 6002 JIC 1 1/16 | 400 | 3/4" | UNF 1 1/16" -12 | 15,5 | 17 | 23,8 | 78,0 | 48 | 48 | 10,7 | M 10 x 35 | 3/8" x 1.1/2" |
| WFG 6002 JIC 1 5/16 | 400 | 3/4" | UN 1.5/16" -12 | 21,5 | 17 | 23,8 | 78,0 | 48 | 48 | 10,7 | M 10 x 35 | 3/8" x 1.1/2" |
| WFG 6002 JIC 7/8 | 400 | 3/4" | UNF 7/8" -14 | 12,3 | 17 | 23,8 | 78,0 | 48 | 48 | 10,7 | M 10 x 35 | 3/8" x 1.1/2" |
| WFG 6003 JIC 1 1/16 | 400 | 1" | UNF 1 1/16" -12 | 15,5 | 24 | 27,8 | 99,0 | 60 | 60 | *1 | M 12 x 45 | 7/16" x 1.3/4" |
| WFG 6003 JIC 1 5/16 | 400 | 1" | UN 1.5/16" -12 | 21,5 | 24 | 27,8 | 99,0 | 60 | 60 | *1 | M 12 x 45 | 7/16" x 1.3/4" |
| WFG 6003 JIC 1 5/8 | 400 | 1" | UN 1.5/8" -12 | 27,5 | 24 | 27,8 | 99,0 | 60 | 60 | *1 | M 12 x 45 | 7/16" x 1.1/2" |
| WFG 6004 JIC 1 5/16 | 400 | 1.1/4" | UN 1.5/16" -12 | 21,5 | 30 | 31,8 | 115,5 | 68 | 68 | *2 | M 14 x 50 | 1/2" x 1.3/4" |
| WFG 6004 JIC 1 5/8 | 400 | 1.1/4" | UN 1.5/8" -12 | 27,5 | 30 | 31,8 | 115,5 | 68 | 68 | *2 | M 14 x 50 | 1/2" x 1.3/4" |
| WFG 6004 JIC 1 7/8 | 400 | 1.1/4" | UN 1.7/8" -12 | 33,0 | 30 | 31,8 | 115,5 | 68 | 68 | *2 | M 14 x 50 | 1/2" x 1.3/4" |
| WFG 6005 JIC 1 5/8 | 400 | 1.1/2" | UN 1.5/8" -12 | 27,5 | 32 | 36,5 | 133,0 | 76 | 76 | 17,0 | M 16 x 55 | 5/8" x 2" |
| WFG 6005 JIC 1 7/8 | 400 | 1.1/2" | UN 1.7/8" -12 | 33,0 | 32 | 36,5 | 133,0 | 76 | 76 | 17,0 | M 16 x 55 | 5/8" x 2" |
PN = Nominal pressure PB = Max. operating pressure
*1) = Choice of 12.0 or 12.5 – *2) = Choice of 13.5 or 14.5
Product versions
This product is also available in the following designs:
- WFG JIC U (3000 / 6000 PSI)
- SAE flange adapter, forged, with 2 flange halves, screw set and O-ring
- WFG JIC M (3000 / 6000 PSI)
- SAE flange adapter, forged, with 2 flange halves, screw set and O-ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.