Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WFS (3000 PSI)
SAE flange adapter, welded on, angle 90°
Product image
Properties
| Pressure series |
3000 psi |
| Standard |
SAE J 518 C ISO 6162 |
| Construction |
Angle 90° |
| Design |
SAE flange adapter welded on connecting piece |
| Scope of supply |
flange only |
| Material |
S355J2G3 (ST52.3) |
| Surface |
black oiled |
Note
In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Item
Sort upwards
Sort downwards
 Identification |
PB 10.9 (bar) |
Size | A (mm) |
B1 (mm) |
B2 (mm) |
C (mm) |
D (mm) |
E (mm) |
F1 (mm) |
F2 (mm) |
S1 (mm) |
S2 (mm) |
L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WFS 3001-15 | 350 | 1/2" | 15 | 11 | 11 | 38,1 | 54,0 | 17,5 | 60,8 | 45,6 | 39 | 38 | 8,7 |
| WFS 3001-16 | 350 | 1/2" | 16 | 10 | 10 | 38,1 | 54,0 | 17,5 | 60,8 | 45,6 | 39 | 38 | 8,7 |
| WFS 3002-18 | 350 | 3/4" | 18 | 15 | 19 | 47,6 | 64,9 | 22,2 | 70,9 | 51,8 | 42 | 45 | 10,7 |
| WFS 3002-20 | 350 | 3/4" | 20 | 14 | 17 | 47,6 | 64,9 | 22,2 | 70,9 | 51,8 | 42 | 45 | 10,7 |
| WFS 3002-22 | 350 | 3/4" | 22 | 18 | 19 | 47,6 | 64,9 | 22,2 | 70,9 | 51,8 | 42 | 45 | 10,7 |
| WFS 3002-25 | 350 | 3/4" | 25 | 17 | 17 | 47,6 | 64,3 | 22,2 | 70,9 | 51,8 | 42 | 45 | 10,7 |
| WFS 3003-25 | 315 | 1" | 25 | 19 | 21 | 52,4 | 69,9 | 26,2 | 79,2 | 58,4 | 45 | 50 | 10,7 |
| WFS 3003-28 | 315 | 1" | 28 | 24 | 25 | 52,4 | 69,9 | 26,2 | 79,2 | 58,4 | 45 | 50 | 10,7 |
| WFS 3003-30 | 315 | 1" | 30 | 21 | 21 | 52,4 | 69,9 | 26,2 | 79,2 | 58,4 | 45 | 50 | 10,7 |
| WFS 3004-25 | 250 | 1.1/4" | 25 | 19 | 27 | 58,7 | 79,4 | 30,2 | 85,3 | 72,6 | 50 | 59 | *1 |
| WFS 3004-30 | 250 | 1.1/4" | 30 | 22 | 27 | 58,7 | 79,4 | 30,2 | 85,3 | 72,6 | 50 | 50 | *1 |
| WFS 3004-35 | 250 | 1.1/4" | 35 | 31 | 32 | 58,7 | 79,4 | 30,2 | 85,3 | 72,6 | 50 | 59 | *1 |
| WFS 3004-38 | 250 | 1.1/4" | 38 | 28 | 27 | 56,7 | 79,4 | 30,2 | 85,3 | 72,6 | 50 | 59 | *1 |
| WFS 3005-38 | 200 | 1.1/2" | 38 | 30 | 32 | 69,9 | 93,8 | 35,7 | 117,1 | 82,2 | 76 | 76 | 13,5 |
| WFS 3005-42 | 200 | 1.1/2" | 42 | 36 | 36 | 69,9 | 93,8 | 35,7 | 117,1 | 82,2 | 76 | 76 | 13,5 |
PN = Nominal pressure PB = Max. operating pressure
*1) = Choice of 10.5, 12.0 or 12.5
Product versions
This product is also available in the following designs:
- WFS M (3000 / 6000 PSI)
- SAE flange adapter, welded on, angle 90°, with 2 flange halves, screw set and O-ring
- WFS U (3000 / 6000 PSI)
- SAE flange adapter, welded on, angle 90°, with 2 flange halves, screw set and O-ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.