HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

WSA

Welded on fitting, angle 90°
Hide product imageProduct image
WSA data/img/product/WSA_MEx.gif - WSA
Hide propertiesProperties
Connection 1 Welded on socket for metric pipe
Connection 2 metric cylindrical outer thread
Sealing form 2 24° inner cone
Design Welded on fitting
Construction Angle 90°
Standard ISO 8434-1
Scope of supply Socket with union nut and cutting ring
Material Steel
Surface phosphate treated and oiled (Znphr5f)
Hide informationNote

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Hide product tableItem

Sort upwards

Sort downwards

Series: LL = Very light L = Light S = Heavy  – PN = Nominal pressure PB = Max. operating pressure  – Ø = External pipe diameter 

Hide product versionsProduct versions

This product is also available in the following designs:

WSA VA
Welded on fitting, angle 90°, Stainless steel
XWSA
Welded on fitting, angle 90°, Steel
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.