Keelevalik
Bulgaaria (Български)
Hiina (汉语)
Hispaania (Español)
Horvaatia (Hrvatski)
Inglise (English)
Itaalia (Italiano)
Leedu (Lietuvių k.)
Läti (Latviešu)
Madalamaade (Nederlands)
Poola (Polski)
Portugali (Português)
Prantsuse (Français)
Rumeenia (Română)
Saksa (Deutsch)
Serbia (Српска)
Slovakkia (Slovenčina)
Sloveenia (Slovenščina)
Türgi (Türkçe)
Tšehhi (Čeština)
Ungari (Magyar)
Vene (Русский)
K-RUNDZYLINDER EINF DL O D MSI
Round cylinders, single-acting (pressureless in the retracted position), with magnet, non-cushioned, »MSI« Series
Toote pilt
Omadused
| Vahendid |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Töörõhk |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
| Temperatuuri ulatus |
-20 °C to +70 °C |
| Kolvivarras |
Stainless steel 1.4301 |
| Rakendamine |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
| Kolb |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
| Tihendusmaterjal |
NBR |
| Silindritoru |
Stainless steel 1.4301 |
Kirjeldus
Series "MSI" single-acting, pressureless retraction, Ø 8 - 40
Vihje
Lisaandmed saate soovi korral.
Artikkel
Alustada sorteerimist ülalt
Alustada sorteerimist altpoolt
 Märgistus |
Kolbide Ø | Keskpunkt (mm) |
Rakendamine | Kolvivarda Ø (mm) |
Kolvivarda väliskeere |
|---|---|---|---|---|---|
| K- 07 15 19 46 | 8 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 47 | 8 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 48 | 8 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 49 | 8 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 50 | 8 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 51 | 8 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 52 | 8 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 53 | 10 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 54 | 10 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 55 | 10 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 56 | 10 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 57 | 10 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 58 | 10 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 59 | 10 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 60 | 12 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 61 | 12 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 62 | 12 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 63 | 12 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 64 | 12 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 65 | 12 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 66 | 12 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 67 | 16 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 68 | 16 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 69 | 16 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 70 | 16 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 71 | 16 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 72 | 16 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 73 | 16 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 74 | 16 mm | 60 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 75 | 16 mm | 75 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 76 | 16 mm | 80 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 77 | 16 mm | 100 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 78 | 20 mm | 10 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 79 | 20 mm | 15 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 80 | 20 mm | 20 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 81 | 20 mm | 25 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 82 | 20 mm | 30 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 83 | 20 mm | 40 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 84 | 20 mm | 50 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 85 | 20 mm | 60 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 86 | 20 mm | 75 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 87 | 20 mm | 80 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 88 | 20 mm | 100 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 89 | 20 mm | 125 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 90 | 20 mm | 150 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 91 | 25 mm | 10 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 92 | 25 mm | 15 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 93 | 25 mm | 20 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 94 | 25 mm | 25 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 95 | 25 mm | 30 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 96 | 25 mm | 40 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 97 | 25 mm | 50 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 98 | 25 mm | 60 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 99 | 25 mm | 75 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 00 | 25 mm | 80 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 01 | 25 mm | 100 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 02 | 25 mm | 125 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 03 | 25 mm | 150 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 04 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 05 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 06 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 07 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 08 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 09 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 10 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 11 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 12 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 13 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 14 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 15 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 16 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 17 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 18 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 19 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 20 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 21 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 22 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 23 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 24 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 25 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 26 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 27 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 28 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 29 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
Lisatarvikud
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Tingimused
Vaatamata põhjalikule kontrollile ei saa me vigade esinemist välistada ning ei vastuta olemasolevate andmete eest.
Kõik andmed meie Interneti-kataloogis põhinevad hetkel kehtivatel normidel ja kutseliidu eeskirjadel. Ainult meie ettenähtud montaažieeskirjadest kinnipidamine garanteerib teile tootekindluse. Kõikide äratoodud eeskirjade mittetäitmine võib toote töökindlust kahandada ning lõpetada meie garantii kehtivuse. Meie garantii kehtib igal juhul vaid HANSA-FLEXi toodetele. Meie tooteid arendatakse pidevalt edasi, mistõttu on tehnilised muudatused võimalikud.