Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Kineski (汉语)
Latvijski (Latviešu)
Litavski (Lietuvių k.)
Mađarski (Magyar)
Nizozemski (Nederlands)
Njemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunjski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Srpski (Српска)
Talijanski (Italiano)
Turski (Türkçe)
Češki (Čeština)
Španjolski (Español)
K-SSV BR
Angle-seat valves with piston actuator
Slika proizvoda
Karakteristike
| Diferencijalni tlak |
0 - 16 bar |
| Temperatura medija |
-10 °C to +180 °C |
| Priključak za upravljački zrak |
G 1/8 |
| Temperatura upravljačkog medija |
max. +60 °C |
| Okolna temperatura |
-20 °C to +70 °C |
| dopušten statički tlak |
Max. 16 bar |
| Kućište ventila |
Bronze |
| Spojni element |
Stainless steel |
| Upravljačka glava |
Polyamide (glass fibre-reinforced) |
| Klip |
Nickel-plated brass (DN 15 to DN 32), PBT + GF 30% (DN 40 to DN 50) |
| Vreteno |
Stainless steel |
| Brtveni materijal |
PTFE |
Opis
Angle-seat valves with external pilot control and a self-aligning valve discfor neutral (bronze body) or corrosive (stainless steel body) media. Very high flow due to angled seat design, Water hammer prevented by fluid entry under the disc, Suitable for vacuum operation (low vacuum), NAMUR interface on the piston actuator. 3/2 and 5/2-way valves can be mounted directly.
Napomena
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Drugi podatci na zahtjev.
Artikl
poredati uzlazno
poredati silazno
 Naziv |
A (mm) |
C (mm) |
F (mm) |
Navoj | maks. razlika radnog tlaka (bar) |
min. upravljački tlak | maks. upravljački tlak |
|---|---|---|---|---|---|---|---|
| K- 07 30 25 24 | 163,0 | 153,0 | 65,0 | G 1/2 | 16 | 4 | 10 |
| K- 07 30 25 25 | 173,0 | 163,0 | 75,0 | G 3/4 | 10 | 4 | 10 |
| K- 07 30 25 26 | 191,0 | 181,0 | 75,0 | G 3/4 | 16 | 4 | 10 |
| K- 07 30 25 27 | 206,0 | 196,0 | 90,0 | G 1 | 11 | 4 | 10 |
| K- 07 30 25 28 | 246,0 | 236,0 | 90,0 | G 1 | 16 | 4 | 8 |
| K- 07 30 25 29 | 255,0 | 245,0 | 110,0 | G 1 1/4 | 14 | 4 | 8 |
| K- 07 30 25 30 | 270,0 | 264,0 | 120,0 | G 1 1/2 | 11 | 4 | 8 |
| K- 07 30 25 31 | 306,0 | 300,0 | 120,0 | G 1 1/2 | 16 | 4 | 8 |
| K- 07 30 25 32 | 316,0 | 311,0 | 150,0 | G 2 | 10 | 4 | 8 |
Dodatne informacije
Other versions e.g. for steam on request
Information on max. operating differential pressures apply for air, gas, corrosive aggressive media, water
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.