Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Holandski (Nederlands)
Hrvatski (Hrvatski)
Italijanski (Italiano)
Kineski (汉语)
Letonski (Latviešu)
Litvanski (Lietuvių k.)
Mađarski (Magyar)
Nemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Turski (Türkçe)
Češki (Čeština)
Španski (Español)
K-SSV BR
Angle-seat valves with piston actuator
Slika proizvoda
Osobine
| Diferencijalni pritisak |
0 - 16 bar |
| Temperatura medija |
-10 °C to +180 °C |
| Priključak upravljačkog vazduha |
G 1/8 |
| Temperatura upravljačkog medija |
max. +60 °C |
| Temperatura okoline |
-20 °C to +70 °C |
| dozvoljeni statički pritisak |
Max. 16 bar |
| Kućište ventila |
Bronze |
| Spojni deo |
Stainless steel |
| Upravljačka glava |
Polyamide (glass fibre-reinforced) |
| Klipovi |
Nickel-plated brass (DN 15 to DN 32), PBT + GF 30% (DN 40 to DN 50) |
| Vreteno |
Stainless steel |
| Zaptivni materijal |
PTFE |
Opis
Angle-seat valves with external pilot control and a self-aligning valve discfor neutral (bronze body) or corrosive (stainless steel body) media. Very high flow due to angled seat design, Water hammer prevented by fluid entry under the disc, Suitable for vacuum operation (low vacuum), NAMUR interface on the piston actuator. 3/2 and 5/2-way valves can be mounted directly.
Napomena
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Ostali podaci na upit.
Artikal
sortiranje nagore
sortiranje nadole
 Naziv |
A (mm) |
C (mm) |
F (mm) |
Navoj | maks. razlika u radnom pritisku (bar) |
min. upravljački pritisak | maks. upravljački pritisak |
|---|---|---|---|---|---|---|---|
| K- 07 30 25 24 | 163,0 | 153,0 | 65,0 | G 1/2 | 16 | 4 | 10 |
| K- 07 30 25 25 | 173,0 | 163,0 | 75,0 | G 3/4 | 10 | 4 | 10 |
| K- 07 30 25 26 | 191,0 | 181,0 | 75,0 | G 3/4 | 16 | 4 | 10 |
| K- 07 30 25 27 | 206,0 | 196,0 | 90,0 | G 1 | 11 | 4 | 10 |
| K- 07 30 25 28 | 246,0 | 236,0 | 90,0 | G 1 | 16 | 4 | 8 |
| K- 07 30 25 29 | 255,0 | 245,0 | 110,0 | G 1 1/4 | 14 | 4 | 8 |
| K- 07 30 25 30 | 270,0 | 264,0 | 120,0 | G 1 1/2 | 11 | 4 | 8 |
| K- 07 30 25 31 | 306,0 | 300,0 | 120,0 | G 1 1/2 | 16 | 4 | 8 |
| K- 07 30 25 32 | 316,0 | 311,0 | 150,0 | G 2 | 10 | 4 | 8 |
Dodatne informacije
Other versions e.g. for steam on request
Information on max. operating differential pressures apply for air, gas, corrosive aggressive media, water
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.