K-KONSTANT DRUCKREGLER STANDARD 2
Constant-pressure regulators
Immagine del prodotto
![K-KONSTANT DRUCKREGLER STANDARD 2 K-KONSTANT DRUCKREGLER STANDARD 2](/data/img/product/00007553_0.jpg)
![K-KONSTANT DRUCKREGLER STANDARD 2 - data/img/product/00042577_0.jpg data/img/product/00042577_0.jpg - K-KONSTANT DRUCKREGLER STANDARD 2](/data/img/product/00042577_0.jpg)
Caratteristiche
Pressione d'ingresso |
Max. 25 bar (G 1/4 to G 1/2), Max. 40 bar (G 3/4 to G 1 1/2) |
Temperatura del fluido |
max. 60 °C |
Temperatura ambiente |
Max. 90 °C |
Materiale di tenuta |
NBR |
Alloggiamento |
Die-cast zinc for (G 1/4 to G 1/2), for Brass (G 3/4 to G 1 1/2) |
Misurazione del valore della portata |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Altri dati |
User manual on request |
Descrizione
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure regulators maintain a constant working pressure regardless of variations in the inlet pressure.
Articolo
![](/images/up.gif)
ordinare verso l'alto
ordinare verso il basso
![]() |
Filetto | Intervallo di regolazione | Portata (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
---|---|---|---|---|---|---|---|---|
K- 07 25 03 98 | G 3/4 | 0.5 - 3 bar | 8700 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 03 99 | G 3/4 | 0.5 - 6 bar | 8200 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 00 | G 3/4 | 0.5 - 10 bar | 7830 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 01 | G 3/4 | 0.5 - 16 bar | 7400 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 02 | G 3/4 | 0.5 - 25 bar | 6500 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 03 | G 1 | 0.5 - 3 bar | 8700 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 04 | G 1 | 0.5 - 6 bar | 8200 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 05 | G 1 | 0.5 - 10 bar | 7830 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 06 | G 1 | 0.5 - 16 bar | 7400 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 07 | G 1 | 0.5 - 25 bar | 6500 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 08 | G 1 1/4 | 0.5 - 3 bar | 16000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 09 | G 1 1/4 | 0.5 - 6 bar | 14000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 10 | G 1 1/4 | 0.5 - 10 bar | 12160 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 11 | G 1 1/4 | 0.5 - 16 bar | 11000 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 12 | G 1 1/4 | 0.5 - 25 bar | 8500 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 13 | G 1 1/2 | 0.5 - 3 bar | 16000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 14 | G 1 1/2 | 0.5 - 6 bar | 14000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 15 | G 1 1/2 | 0.5 - 10 bar | 12160 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 16 | G 1 1/2 | 0.5 - 16 bar | 11000 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 17 | G 1 1/2 | 0.5 - 25 bar | 8500 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
Parti di ricambio
![](/images/up.gif)
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Esclusione della responsabilità
Nonostante il più attento esame non si possono escludere eventuali errori ed omissioni, non ci assumiamo alcuna responsabilità per le indicazioni contenute.
Tutte le indicazioni del nostro catalogo online si riferiscono alle norme e alle prescrizioni delle associazioni professionali attualmente in vigore. Soltanto l'osservanza delle istruzioni di montaggio può garantire la sicurezza del prodotto. La mancata osservanza di tutte le prescrizioni indicate può compromettere le funzionalità di sicurezza del prodotto e causare la perdita della garanzia. La nostra garanzia vale in ogni caso solo per i prodotti HANSA-FLEX. I nostri prodotti sono costantemente sviluppati e pertanto sono possibili modifiche tecniche.