Pasirinkti kalbą
Anglų k. (English)
Bulgariškai (Български)
Estiškai (Eesti)
Ispanų k. (Español)
Itališkai (Italiano)
Kinų k. (汉语)
Kroatų k. (Hrvatski)
Latvių k. (Latviešu)
Lenkų k. (Polski)
Olandų k. (Nederlands)
Portugalų k. (Português)
Prancūzų k.(Français)
Rumunų k. (Română)
Rusų k. (Русский)
Serbiškai (Српска)
Slovakų k. (Slovenčina)
Slovėniškai (Slovenščina)
Turkiškai (Türkçe)
Vengrų k. (Magyar)
Vokiečių (Deutsch)
Čekų k. (Čeština)
PR V4 (M)
Tikslusis plieninis vamzdis, metrinis, 1,4571
Gaminio nuotrauka
Savybės
| Konstrukcija |
Tikslusis plieninis vamzdis, metrinis |
| Medžiaga |
nerūdijantis plienas 1.4571 |
| Vamzdžio ilgis |
6 metrai |
Nuoroda
Slėgio duomenys nurodomi pagal tiesų vamzdį.
Lenkto vamzdžio atveju reikia atsižvelgti į atitinkamus sienos storius, analogiškus DIN EN 13480-4.
Prekė
rūšiuoti aukštyn
rūšiuoti žemyn
 Pavadinimas |
Ø d2 (mm) |
AD tolerancija +/- (mm) |
Ø d1 (mm) |
S (mm) |
ID tolerancija +/- (mm) |
I apkrovos atvejis (bar) |
III apkrovos atvejis (bar) |
|---|---|---|---|---|---|---|---|
| PR 34-2 V4 | 34,0 | - | 30,0 | 2,00 | - | - | - |
| PR 14-1 V4 | 14,0 | - | 12,0 | 1,00 | - | - | - |
| PR 04-0.5 V4 | 4,0 | - | 3,0 | 0,50 | - | - | - |
| PR 04-1 V4 | 4,0 | 0,08 | 2,0 | 1,00 | 0,15 | 600 | 408 |
| PR 05-0.5 V4 | 5,0 | - | 4,0 | 0,50 | - | - | - |
| PR 05-1 V4 | 5,0 | - | 3,0 | 1,00 | - | - | - |
| PR 06-0.5 V4 | 6,0 | 0,08 | 5,0 | 0,50 | 0,15 | - | - |
| PR 06-1 V4 | 6,0 | 0,08 | 4,0 | 1,00 | 0,15 | 400 | 287 |
| PR 06-1.5 V4 | 6,0 | 0,08 | 3,0 | 1,50 | 0,15 | 660 | 442 |
| PR 06-2 V4 | 6,0 | 0,08 | 2,0 | 2,00 | 0,15 | 915 | 575 |
| PR 08-1 V4 | 8,0 | 0,08 | 6,0 | 1,00 | 0,15 | 300 | 222 |
| PR 08-1.5 V4 | 8,0 | 0,08 | 5,0 | 1,50 | 0,15 | 495 | 347 |
| PR 08-2 V4 | 8,0 | 0,08 | 4,0 | 2,00 | 0,15 | 690 | 458 |
| PR 08-2.5 V4 | 8,0 | - | 3,0 | 2,50 | - | - | - |
| PR 10-0.5 V4 | 10,0 | 0,08 | 9,0 | 0,50 | 0,08 | 105 | 81 |
| PR 10-1 V4 | 10,0 | 0,08 | 8,0 | 1,00 | 0,15 | 240 | 181 |
| PR 10-1.2 V4 | 10,0 | - | 7,6 | 1,20 | - | - | - |
| PR 10-1.5 V4 | 10,0 | 0,08 | 7,0 | 1,50 | 0,15 | 396 | 285 |
| PR 10-2 V4 | 10,0 | 0,08 | 6,0 | 2,00 | 0,15 | 552 | 380 |
| PR 10-2.5 V4 | 10,0 | - | 5,0 | 2,50 | - | - | - |
| PR 12-1 V4 | 12,0 | 0,08 | 10,0 | 1,00 | 0,15 | 200 | 152 |
| PR 12-1.5 V4 | 12,0 | 0,08 | 9,0 | 1,50 | 0,15 | 330 | 242 |
| PR 12-2 V4 | 12,0 | 0,08 | 8,0 | 2,00 | 0,15 | 460 | 325 |
| PR 12-3 V4 | 12,0 | 0,08 | 6,0 | 3,00 | 0,25 | 694 | 461 |
| PR 13-1 V4 | 13,0 | - | 11,0 | 1,00 | - | - | - |
| PR 14-1.5 V4 | 14,0 | 0,08 | 11,0 | 1,50 | 0,15 | 283 | 210 |
| PR 14-2 V4 | 14,0 | 0,08 | 10,0 | 2,00 | 0,15 | 394 | 284 |
| PR 14-2.5 V4 | 14,0 | 0,08 | 9,0 | 2,50 | 0,15 | 505 | 353 |
| PR 14-3 V4 | 14,0 | - | 8,0 | 3,00 | - | - | - |
| PR 15-1 V4 | 15,0 | 0,08 | 13,0 | 1,00 | 0,08 | 174 | 134 |
| PR 15-1.5 V4 | 15,0 | 0,08 | 12,0 | 1,50 | 0,15 | 264 | 197 |
| PR 15-2 V4 | 15,0 | 0,08 | 11,0 | 2,00 | 0,15 | 368 | 267 |
| PR 16-1 V 4 | 16,0 | - | 14,0 | 1,00 | - | - | - |
| PR 16-1.5 V4 | 16,0 | 0,08 | 13,0 | 1,50 | 0,08 | 261 | 195 |
| PR 16-2 V4 | 16,0 | 0,08 | 12,0 | 2,00 | 0,15 | 345 | 252 |
| PR 16-2.5 V4 | 16,0 | 0,08 | 11,0 | 2,50 | 0,15 | 442 | 314 |
| PR 16-3 V4 | 16,0 | 0,08 | 10,0 | 3,00 | 0,15 | 540 | 373 |
| PR 16-4 V4 | 16,0 | - | 8,0 | 4,00 | - | - | - |
| PR 18-1 V4 | 18,0 | 0,08 | 16,0 | 1,00 | 0,08 | 145 | 112 |
| PR 18-1.5 V4 | 18,0 | 0,08 | 15,0 | 1,50 | 0,08 | 232 | 175 |
| PR 18-2 V4 | 18,0 | 0,08 | 14,0 | 2,00 | 0,08 | 318 | 234 |
| PR 18-2.5 V4 | 18,0 | 0,08 | 13,0 | 2,50 | 0,15 | 393 | 283 |
| PR 18-3 V4 | 18,0 | - | 12,0 | 3,00 | - | - | - |
| PR 18-4 V4 | 18,0 | - | 10,0 | 4,00 | - | - | - |
| PR 20-1 V 4 | 20,0 | 0,08 | 18,0 | 1,00 | - | - | - |
| PR 20-1.5 V 4 | 20,0 | 0,08 | 17,0 | 1,50 | - | - | - |
| PR 20-2 V4 | 20,0 | 0,08 | 16,0 | 2,00 | 0,08 | 287 | 213 |
| PR 20-2.5 V4 | 20,0 | 0,08 | 15,0 | 2,50 | 0,15 | 354 | 258 |
| PR 20-3 V4 | 20,0 | 0,08 | 14,0 | 3,00 | 0,15 | 432 | 308 |
| PR 20-3.5 V4 | 20,0 | 0,08 | 13,0 | 3,50 | 0,15 | 510 | 355 |
| PR 20-4 V4 | 20,0 | - | 12,0 | 4,00 | - | - | - |
| PR 22-1 V 4 | 22,0 | 0,08 | 20,0 | 1,00 | - | - | - |
| PR 22-1.5 V4 | 22,0 | 0,08 | 19,0 | 1,50 | 0,08 | 190 | 145 |
| PR 22-2 V4 | 22,0 | 0,08 | 18,0 | 2,00 | 0,08 | 260 | 195 |
| PR 22-2.5 V4 | 22,0 | 0,08 | 17,0 | 2,50 | 0,15 | 321 | 236 |
| PR 22-3 V4 | 22,0 | 0,08 | 16,0 | 3,00 | 0,15 | 392 | 283 |
| PR 22-4 V4 | 22,0 | - | 14,0 | 4,00 | - | - | - |
| PR 22-6 V4 | 22,0 | - | 10,0 | 6,00 | - | - | - |
| PR 23-1.5 V4 | 23,0 | - | 20,0 | 1,50 | - | - | - |
| PR 24-4 V4 | 24,0 | - | 16,0 | 4,00 | - | - | - |
| PR 25-1.5 V4 | 25,0 | 0,08 | 22,0 | 1,50 | 0,08 | 167 | 128 |
| PR 25-2 V4 | 25,0 | 0,08 | 21,0 | 2,00 | 0,08 | 229 | 173 |
| PR 25-2.5 V4 | 25,0 | 0,08 | 20,0 | 2,50 | 0,08 | 292 | 216 |
| PR 25-3 V4 | 25,0 | 0,08 | 19,0 | 3,00 | 0,15 | 345 | 252 |
| PR 25-4 V4 | 25,0 | - | 17,0 | 4,00 | - | - | - |
| PR 25-5 V4 | 25,0 | - | 15,0 | 5,00 | - | - | - |
| PR 25-6 V4 | 25,0 | - | 13,0 | 6,00 | - | - | - |
| PR 28-1 V4 | 28,0 | - | 26,0 | 1,00 | - | - | - |
| PR 28-1.5 V4 | 28,0 | 0,08 | 25,0 | 1,50 | 0,08 | 149 | 115 |
| PR 28-2 V4 | 28,0 | 0,08 | 24,0 | 2,00 | 0,08 | 205 | 156 |
| PR 28-2.5 V4 | 28,0 | 0,08 | 23,0 | 2,50 | 0,08 | 260 | 195 |
| PR 28-3 V4 | 28,0 | - | 22,0 | 3,00 | - | - | - |
| PR 28-4 V4 | 28,0 | - | 20,0 | 4,00 | - | - | - |
| PR 28-5 V4 | 28,0 | - | 18,0 | 5,00 | - | - | - |
| PR 30-2 V4 | 30,0 | 0,08 | 26,0 | 2,00 | 0,08 | 191 | 146 |
| PR 30-2.5 V4 | 30,0 | 0,08 | 25,0 | 2,50 | 0,08 | 243 | 183 |
| PR 30-3 V4 | 30,0 | 0,08 | 24,0 | 3,00 | 0,15 | 288 | 214 |
| PR 30-4 V4 | 30,0 | 0,08 | 22,0 | 4,00 | 0,15 | 392 | 282 |
| PR 30-5 V4 | 30,0 | 0,08 | 20,0 | 5,00 | 0,15 | 496 | 347 |
| PR 32-1.5 V4 | 32,0 | - | 29,0 | 1,50 | - | - | - |
| PR 32-2 V4 | 32,0 | - | 28,0 | 2,00 | - | - | - |
| PR 32-2.5 V4 | 32,0 | - | 27,0 | 2,50 | - | - | - |
| PR 32-4 V4 | 32,0 | - | 26,0 | 4,00 | - | - | - |
| PR 32-6 V4 | 32,0 | - | 20,0 | 6,00 | - | - | - |
| PR 35-1.5 V 4 | 35,0 | 0,08 | 32,0 | 1,50 | 0,08 | 119 | 93 |
| PR 35-2 V4 | 35,0 | 0,15 | 31,0 | 2,00 | 0,15 | 151 | 117 |
| PR 35-2.5 V4 | 35,0 | 0,15 | 30,0 | 2,50 | 0,15 | 196 | 149 |
| PR 35-3 V4 | 35,0 | - | 29,0 | 3,00 | - | - | - |
| PR 35-4 V4 | 35,0 | - | 27,0 | 4,00 | - | - | - |
| PR 35-5 V 4 | 35,0 | 0,15 | 25,0 | 5,00 | 0,15 | 418 | 299 |
| PR 38-1.5 V4 | 38,0 | - | 35,0 | 1,50 | - | - | - |
| PR 38-2 V4 | 38,0 | - | 34,0 | 2,00 | - | - | - |
| PR 38-2.6 V4 | 38,0 | - | 32,8 | 2,60 | - | - | - |
| PR 38-3 V4 | 38,0 | - | 32,0 | 3,00 | - | - | - |
| PR 38-4 V4 | 38,0 | 0,15 | 30,0 | 4,00 | 0,15 | 303 | 224 |
| PR 38-5 V4 | 38,0 | 0,15 | 28,0 | 5,00 | 0,15 | 385 | 278 |
| PR 38-6 V4 | 38,0 | - | 26,0 | 6,00 | - | - | - |
| PR 40-2 V4 | 40,0 | - | 36,0 | 2,00 | - | - | - |
| PR 42-2 V4 | 42,0 | 0,20 | 38,0 | 2,00 | 0,20 | 118 | 92 |
| PR 42-3 V4 | 42,0 | 0,20 | 36,0 | 3,00 | 0,20 | 193 | 147 |
| PR 42-6 V4 | 42,0 | - | 30,0 | 6,00 | - | - | - |
| PR 43-1.5 V4 | 43,0 | - | 40,0 | 1,50 | - | - | - |
| PR 50-1.5 V4 | 50,0 | - | 47,0 | 1,50 | - | - | - |
| PR 50-2 V4 | 50,0 | - | 46,0 | 2,00 | - | - | - |
| PR 50-4 V4 | 50,0 | - | 42,0 | 4,00 | - | - | - |
| PR 50-5 V4 | 50,0 | - | 40,0 | 5,00 | - | - | - |
| PR 50-6 V4 | 50,0 | - | 38,0 | 6,00 | - | - | - |
| PR 54-2 V4 | 54,0 | - | 50,0 | 2,00 | - | - | - |
| PR 57-2 V4 | 57,0 | - | 53,0 | 2,00 | - | - | - |
| PR 63.5-1.5 V4 | 63,5 | - | 60,5 | 1,50 | - | - | - |
| PR 64-2 V4 | 64,0 | - | 60,0 | 2,00 | - | - | - |
| PR 70-1.5 V4 | 70,0 | - | 67,0 | 1,50 | - | - | - |
| PR 70-2 V4 | 70,0 | - | 66,0 | 2,00 | - | - | - |
| PR 70-5 V4 | 70,0 | - | 60,0 | 5,00 | - | - | - |
| PR 101.5-2 V4 | 101,5 | - | 97,5 | 2,00 | - | - | - |
| PR 108-3 V4 | 108,0 | - | 102,0 | 3,00 | - | - | - |
| PR 129-2 V4 | 129,0 | - | 125,0 | 2,00 | - | - | - |
| PR 133-4 V4 | 133,0 | - | 125,0 | 4,00 | - | - | - |
| PR 152-2 V4 | 152,0 | - | 148,0 | 2,00 | - | - | - |
| PR 159-4.5 V4 | 159,0 | - | 150,0 | 4,50 | - | - | - |
Papildoma informacija
Analoginis apskaičiavimas DIN 2413 (eskizas)
I apkrovos atvejis: statinis (iki 100 °C)
III apkrovos atvejis: dinaminis (iki 200 °C) vibravimo plotis = P bar
Tvirtumo koeficientas: K 234 [N/mm2]
Saugumo faktorius: S 1,5
Stiprumas veikiant ilgalaikei apkrovai: σSch/D 190 [N/mm2]
Tolerancijos: DIN 10305-4
Tempimo ribos pagal DIN 10216-5 Rp 1,0 iki 50°C
Atsakomybės atsisakymas
Nepaisant kruopštaus patikrinimo, negalime atmesti klaidų tikimybės, todėl už esamus duomenis neatsakome.
Visi duomenys mūsų internetiniame kataloge pateikiami atsižvelgiant į tuo metu profsąjungų galiojančias normas ir nuostatas. Produkto saugumas užtikrinamas tik tada, jeigu laikysitės mūsų montavimo nurodymų. Nesilaikant visų minėtų nurodymų gali būti pažeistas produkto saugumas ir gal nustoti galioti mūsų garantija. Mūsų garantija bet kokiu atveju galioja tik HANSA-FLEX gaminiams. Mūsų gaminiai nuolatos tobulinami, todėl galimi techniniai pakeitimai.