K-DVST OHNE REGLER
Pressure booster without regulatorSlika izdelka
Lastnosti
vstopni tlak |
2 - 10 bar |
izhodni tlak |
Max. 20 bar (regulated: max. 16 bar) |
območje temperatur: |
-10 °C to +50 °C (40 mm bore), -10 °C to +60 °C (63 mm bore) |
Sredstva |
Filtered, unlubricated or lubricated compressed air (if lubrication is used, it must be continuous) |
tesnilni material |
NBR |
regulator tlaka |
With plastic body |
ohišje |
Aluminium, anodised |
cev |
Anodised aluminium jacket |
Montaža |
Any position, with 4 mounting holes |
P2:P1 |
2:1 |
Opis
Pressure multipliers (boosters) allow a separate compressed air store with up to double pressure to be installed for selected devices in a compressed air system without an external energy source, i.e. it is possible to work with a maximum pressure of 20 bar in a standard 10 bar system (maximum ratio 2:1). This is achieved using a double piston, which is operated by a combination of integrated check valves in such a way that the booster works automatically until the target pressure is reached in a compressed air tank and is then automatically switched off. A tank is always required to build up the pressure and store the compressed air!
Navodilo
For information about calculating the filling times for different tank sizes, refer to the above-mentioned data sheet available on our website
Drugi podatki na zahtevo.
Artikel
razvrstiti rastoče
razvrstiti padajoče
Opis | Priključek | Ø bata (mm) |
H (mm) |
L (mm) |
---|---|---|---|---|
K- 07 25 08 64 | G 1/8 | 40,0 | 64,0 | 194,0 |
K- 07 25 08 66 | G 3/8 | 63,0 | 98,0 | 290,0 |
Dodatne informacije
Pribor
- K-ZUBEH ERSATZ LUFT BOOSTER
- Accessories / spare parts for Air-air-multiplicator (booster)
Zavrnitev odgovornosti
Kljub skrbnemu preverjanju napak ne moremo izključiti in za informacije, ki so tu navedene, ne prevzemamo nobene odgovornosti.
Vse informacije v našem spletnem katalogu temeljijo na trenutno veljavnih standardih in predpisih poklicnih združenj. Samo če se držite naših navodil za montažo, vam lahko zagotovimo varnost proizvodov. Neupoštevanje teh pravil lahko vpliva na zanesljivost izdelka in vodi do izgube naše garancije. Naša garancija v vsakem primeru velja samo za izdelke HANSA-FLEX. Naše izdelke se stalno dalje razvija, tehnične spremembe so torej možne.