K-LKM S NW7,4 SCHL TUE
Safety couplings DN 7.4, with hose stemSlika proizvoda
Osobine
Radni pritisak |
Max. 12 bar, maximum static working pressure (non-pulsating) |
Radni pritisak utičnog naglavka i nastavka |
0 to 35 bar |
Protok vazduha |
1.300 l/min (at 6 bar and Δp = 0.5 bar) |
Temperatura medija |
-20 °C to +60 °C |
Kućište, telo ventila |
Nickel-plated brass |
Ventil |
Brass |
Čaura za odbravljivanje |
Plastic |
Opruga, sigurnosni prsten, čivije, kugle |
Stainless steel |
Zaptivni materijal |
NBR |
Opis
One-hand air relief couplings with double locking system. Connection: Similar to standard couplings, simply by pressing the plug into the coupling. Disconnection: The first locking mechanism is accessible when the sleeve is pushed back. The coupling valve closes. Air can then then be relieved from the plug side (hose). The second locking mechanism is released by actuating the sleeve again. The coupling can now be disconnected. This system meets the requirements of ISO 4414 and is BIA-compliant (BIA = industrial safety institute).
Napomena
Ostali podaci na upit.
Artikal
sortiranje nagore
sortiranje nadole
Naziv | Priključak | Dužina (mm) |
SW (mm) |
---|---|---|---|
K- 07 35 03 04 | Stem, I.D. 6 | 71,2 | 22 |
K- 07 35 03 05 | Stem, I.D. 8 | 71,2 | 22 |
K- 07 35 03 06 | Stem, I.D. 9 | 71,2 | 22 |
K- 07 35 03 07 | Stem, I.D. 10 | 71,2 | 22 |
K- 07 35 03 08 | Stem, I.D. 13 | 71,2 | 22 |
Dodatni elementi
- K-NIPPEL KUPPL NW7 AG VZ
- Plugs for couplings DN 7.2 - DN 7.8, hardened, galvanised steel, male
- K-NIPPEL KUPPL NW7 IG VZ 2
- Plugs for couplings DN 7.2 - DN 7.8, hardened, galvanised steel, female
- K-TUE 7,2 7,8 ST VZ 1
- Stems for couplings DN 7.2 - DN 7.8, hardened, galvanised steel,
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.