SRS SP 30-100
Welded on base plate for single pipe clampProduct image
Properties
Design |
for single pipe clamps |
Series |
heavy |
Standard |
DIN 3015-2 |
Material |
Steel |
Surface |
phosphate treated |
Item
Sort upwards
Sort downwards
Identification | Clamp size | B (mm) |
e1 (mm) |
G | L (mm) |
S (mm) |
---|---|---|---|---|---|---|
SRS SP 30 | 1 | 30 | 33 | M 10 | 73 | 8 |
SRS SP 40 | 2 | 30 | 45 | M 10 | 84 | 8 |
SRS SP 50 | 3 | 30 | 60 | M 10 | 100 | 8 |
SRS SP 60 | 4 | 45 | 90 | M 12 | 140 | 10 |
SRS SP 70 | 5 | 60 | 122 | M 16 | 180 | 10 |
SRS SP 80 | 6 | 80 | 168 | M 20 | 225 | 15 |
SRS SP 90 | 7 | 90 | 205 | M 24 | 270 | 15 |
SRS SP 100 | 8 | 120 | 265 | M 30 | 340 | 25 |
Product versions
This product is also available in the following designs:
- SRS SP 30-100 V4
- Welded on base plate for single pipe clamp, Stainless steel 1.4571
- SRS SP 30-100 VZ
- Welded on base plate for single pipe clamp, electro galvanised
Additional element for following products
- C
- Configuration of group C
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.