Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
AFG M (3000 PSI)
SAE external thread flange
Product image
Properties
| Pressure series |
3000 psi |
| Standard |
DIN 3901/3902 |
| Construction |
straight |
| Design |
SAE external thread flange |
| Mounting |
Screw bore hole |
| Scope of supply |
flange only |
| Material |
S355J2G3 (ST52.3) |
| Surface |
black oiled |
Note
In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
Series | Ø RAD (mm) |
PB 10.9 (bar) |
Size | A | Ø B (mm) |
C (mm) |
E (mm) |
G1 (mm) |
I (mm) |
L (mm) |
M metr. | M unc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AFG 80 M/L15 | L | 15 | 315 | 1/2" | M22x1,5 | 12 | 38,1 | 17,5 | 52 | 7,0 | 9,0 | M 8 x 30 | 5/16" x 1.1/4" |
| AFG 100 M/L22 | L | 22 | 160 | 3/4" | M30x2 | 19 | 47,6 | 22,2 | 60 | 7,5 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 100 M/S20 | S | 20 | 345 | 3/4" | M30x2 | 16 | 47,6 | 22,2 | 60 | 10,5 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 102 M/L22 | L | 22 | 160 | 1" | M30x2 | 19 | 52,4 | 26,2 | 63 | 7,5 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 102 M/L28 | L | 28 | 160 | 1" | M36x2 | 24 | 52,4 | 26,2 | 63 | 7,5 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 102 M/S20 | S | 20 | 315 | 1" | M30x2 | 16 | 52,4 | 26,2 | 63 | 10,5 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 102 M/S25 | S | 25 | 315 | 1" | M36x2 | 20 | 52,4 | 26,2 | 63 | 12,0 | 11,5 | M 10 x 30 | 3/8" x 1.1/4" |
| AFG 104 M/L28 | L | 28 | 160 | 1.1/4" | M36x2 | 24 | 58,7 | 30,2 | 65 | 7,5 | 11,5 | M 10 x 35 | 7/16" x 1.1/2" |
| AFG 104 M/L35 | L | 35 | 160 | 1.1/4" | M45x2 | 29 | 58,7 | 30,2 | 65 | 10,5 | 11,5 | M 10 x 35 | 7/16" x 1.1/2" |
| AFG 104 M/S30 | S | 30 | 250 | 1.1/4" | M42x2 | 25 | 58,7 | 30,2 | 65 | 13,5 | 11,5 | M 10 x 35 | 7/16" x 1.1/2" |
| AFG 106 M/L42 | L | 42 | 160 | 1.1/2" | M52x2 | 36 | 69,9 | 35,7 | 70 | 11,0 | 13,5 | M 12 x 35 | 1/2" x 1.1/2" |
| AFG 106 M/S38 | S | 38 | 200 | 1.1/2" | M52x2 | 32 | 69,9 | 35,7 | 70 | 16,0 | 13,5 | M 12 x 35 | 1/2" x 1.1/2" |
PN = Nominal pressure PB = Max. operating pressure – Ø = External pipe diameter – Series: LL = Very light L = Light S = Heavy
Product versions
This product is also available in the following designs:
- AFG M M (3000 / 6000 PSI)
- SAE external thread flange, with metric screw set and O-ring
- AFG M U (3000 / 6000 PSI)
- SAE external thread flange, with UNC screw set and O-ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.