W45 HRK HB
Screw-in socket, angle 45°Product image
Properties
Connection 1 |
BSPT conical external threads |
Sealing form 1 |
thread seal |
Connection 2 |
BSP cylindrical external threads |
Sealing form 2 |
60° inner cone |
Design |
Screw-in sockets |
Construction |
Angle 45° |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
---|---|---|---|
W45 HRK 04 HB | R 1/4" K | G 1/4" -19 | 14 |
W45 HRK 04 HB 06 | R 1/4" K | G 3/8" -19 | 19 |
W45 HRK 06 HB 04 | R 3/8" K | G 1/4" -19 | 19 |
W45 HRK 06 HB | R 3/8" K | G 3/8" -19 | 19 |
W45 HRK 06 HB 08 | R 3/8" K | G 1/2" -14 | 22 |
W45 HRK 08 HB 06 | R 1/2" K | G 3/8" -19 | 22 |
W45 HRK 08 HB | R 1/2" K | G 1/2" -14 | 22 |
W45 HRK 08 HB 12 | R 1/2" K | G 3/4" -14 | 27 |
W45 HRK 12 HB 08 | R 3/4" K | G 1/2" -14 | 27 |
W45 HRK 12 HB | R 3/4" K | G 3/4" -14 | 27 |
W45 HRK 12 HB 16 | R 3/4" K | G 1" -11 | 33 |
W45 HRK 16 HB 12 | R 1" K | G 3/4" -14 | 33 |
W45 HRK 16 HB | R 1" K | G 1" -11 | 33 |
W45 HRK 16 HB 20 | R 1" K | G 1.1/4" -11 | 41 |
W45 HRK 20 HB 16 | R 1.1/4" K | G 1" -11 | 41 |
W45 HRK 20 HB | R 1.1/4" K | G 1.1/4" -11 | 41 |
W45 HRK 20 HB 24 | R 1.1/4" K | G 1.1/2" -11 | 48 |
W45 HRK 24 HB 20 | R 1.1/2" K | G 1.1/4" -11 | 48 |
W45 HRK 24 HB | R 1.1/2" K | G 1.1/2" -11 | 48 |
W45 HRK 32 HB 24 | R 2" K | G 1.1/2" -11 | 64 |
W45 HRK 32 HB | R 2" K | G 2" -11 | 64 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.