W45 AOB HB
Connector, angle 45°Product image
Properties
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Connection 2 |
BSP cylindrical external threads |
Sealing form 2 |
60° inner cone |
Design |
Connectors |
Construction |
Angle 45° |
Material |
Steel |
Surface |
electro galvanised |
Note
W45AOB02HB is without O-ring
Item
Sort upwards
Sort downwards
Identification | G1 + G2 | AF (mm) |
S1 | OR |
---|---|---|---|---|
W45 AOB 02 HB | G 1/8" -28 | 11 | 14 | - |
W45 AOB 04 HB | G 1/4" -19 | 14 | 17 | 6.5 x 1.0 |
W45 AOB 06 HB | G 3/8" -19 | 19 | 22 | 8.1 x 1.6 |
W45 AOB 08 HB | G 1/2" -14 | 22 | 27 | 12.1 x 1.6 |
W45 AOB 10 HB | G 5/8" -14 | 25 | 27 | 13.0 x 1.6 |
W45 AOB 12 HB | G 3/4" -14 | 37 | 32 | 17.1 x 1.6 |
W45 AOB 16 HB | G 1" -11 | 33 | 41 | 22.1 x 1.6 |
W45 AOB 20 HB | G 1.1/4" -11 | 41 | 50 | 29.1 x 1.6 |
W45 AOB 24 HB | G 1.1/2" -11 | 50 | 60 | 35.1 x 1.6 |
SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.