Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WV 5/2 BEIDS ELEKTRO
5/2-way spool valves, double solenoid
Product image
Properties
| Operating principle |
5/2-way |
| Operating pressure |
2.5 - 10 bar; Max. vacuum 10 bar (external pilot air) |
| min. working pressure |
2,5 bar |
| Temp. range |
-10 °C to +60 °C |
| Flow rate 6bar and 10bar |
1500 Nl/min (G 1/4), 4600 Nl/min (G 1/2) |
| Electrical connection |
Coupler plug PG 9 - form B |
| Protection IP |
IP 65 (DIN 46244) |
| Housing |
Anodised aluminium, blue |
| Piston gate valve |
Stainless steel |
| Sealant |
NBR |
Description
This valve design, featuring the Tapered Tee Seal®, offers the ability to run without lubrication and supports almost any compressed air quality.
The valves are largely resistant to dirt and can thus also be used under extreme conditions without any problems.
Leakage is now a thing of the past and the spool no longer sticks, even after long idle periods.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | Voltage | DN | circuit diagram number | Control |
|---|---|---|---|---|---|
| K- 07 15 02 25 | G 1/4 | 24 V DC | 8 | 36 | |
| K- 07 15 02 26 | G 1/2" | 24 V DC | 15 | 36 | |
| K- 07 15 02 27 | G 1/4 | 230 V AC, 50 Hz | 8 | 36 | |
| K- 07 15 02 28 | G 1/2" | 230 V AC, 50 Hz | 15 | 36 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.