HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-WV 5/2 EINS ELEKTRO

5/2-way spool valves, single solenoid
Hide product imageProduct image
K-WV 5/2 EINS ELEKTRO data/img/product/517-2000schalt-35.jpg - K-WV 5/2 EINS ELEKTRO
Hide propertiesProperties
Operating principle 5/2-way
Operating pressure 2.5 - 10 bar; Max. vacuum 10 bar (external pilot air)
min. working pressure 2,5 bar
Temp. range -10 °C to +60 °C
Flow rate 6bar and 10bar 1500 Nl/min (G 1/4), 4600 Nl/min (G 1/2)
Electrical connection Coupler plug PG 9 - form B
Protection IP IP 65 (DIN 46244)
Housing Anodised aluminium, blue
Piston gate valve Stainless steel
Sealant NBR
Hide descriptionDescription

This valve design, featuring the Tapered Tee Seal®, offers the ability to run without lubrication and supports almost any compressed air quality.
The valves are largely resistant to dirt and can thus also be used under extreme conditions without any problems.
Leakage is now a thing of the past and the spool no longer sticks, even after long idle periods.

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.