Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-RUNDZYLINDER DOPP M D
Rundzylinder, doppeltwirkend (mit Magnet, mit einstellbarer Dämpfung)
Product image
Properties
| Media |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Working pressure |
Max. 10 bar |
| Set pressure |
0,8 bar (Ø 8 bis Ø 12), 0,6 bar (Ø 16 bis Ø 25) |
| Temp. range |
-10 °C to +80 °C |
| Design |
Flanged joint between stainless steel barrel and heads |
| Piston rod |
C45 steel, hard chrome-plated |
| Pipe |
Stainless steel 1.4301 |
| Piston |
Synthetic (acetal) resin |
| Sealant |
NBR |
Description
Single and double-acting cylinders, with magnetic piston.
Note
Maximum recommended stroke: Double-acting: Ø 8 - Ø 10 = 100 stroke, Ø 12 - Ø 16 = 200 stroke, Ø 20 - Ø 25 = 250 stroke
Single-acting: Ø 8 - Ø 25 = 50 stroke. Longer stroke lengths can cause operational malfunctions.
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Ø piston | Stroke (mm) |
Connection | Thread piston rod |
|---|---|---|---|---|
| K- 07 15 24 89 | 16 mm | 10 | M 5 | M 6 |
| K- 07 15 24 90 | 16 mm | 25 | M 5 | M 6 |
| K- 07 15 24 91 | 16 mm | 50 | M 5 | M 6 |
| K- 07 15 24 92 | 16 mm | 80 | M 5 | M 6 |
| K- 07 15 24 93 | 16 mm | 100 | M 5 | M 6 |
| K- 07 15 24 94 | 16 mm | 125 | M 5 | M 6 |
| k- 07 15 24 95 | 16 mm | 160 | M 5 | M 6 |
| K- 07 15 24 96 | 16 mm | 200 | M 5 | M 6 |
| K- 07 15 24 97 | 20 mm | 10 | G 1/8 | M 8 |
| K- 07 15 24 98 | 20 mm | 25 | G 1/8 | M 8 |
| K- 07 15 24 99 | 20 mm | 50 | G 1/8 | M 8 |
| K- 07 15 25 00 | 20 mm | 80 | G 1/8 | M 8 |
| K- 07 15 25 01 | 20 mm | 100 | G 1/8 | M 8 |
| K- 07 15 25 02 | 20 mm | 125 | G 1/8 | M 8 |
| K- 07 15 25 03 | 20 mm | 160 | G 1/8 | M 8 |
| K- 07 15 25 04 | 20 mm | 200 | G 1/8 | M 8 |
| K- 07 15 25 05 | 20 mm | 250 | G 1/8 | M 8 |
| K- 07 15 25 06 | 25 mm | 10 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 07 | 25 mm | 25 | G 1/8 | M 10 x 1.25 |
| K- 07 15 24 88 | 25 mm | 50 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 08 | 25 mm | 80 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 09 | 25 mm | 100 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 10 | 25 mm | 125 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 11 | 25 mm | 160 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 12 | 25 mm | 200 | G 1/8 | M 10 x 1.25 |
| K- 07 15 25 13 | 25 mm | 250 | G 1/8 | M 10 x 1.25 |
Additional information
Important: The scope of supply does not include a connector. Please order separately.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.