K-RUNDZYLINDER DOPP O D 1
Round cylinders, double acting (magnetic, non-cushioned)
Product image
![K-RUNDZYLINDER DOPP O D 1 K-RUNDZYLINDER DOPP O D 1](/data/img/product/00004967_0.jpg)
![K-RUNDZYLINDER DOPP O D 1 - data/img/product/00048889_0.gif data/img/product/00048889_0.gif - K-RUNDZYLINDER DOPP O D 1](/data/img/product/00048889_0.gif)
Properties
Media |
Filtered (50 μm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
Working pressure |
Max. 10 bar |
Set pressure |
0,4 bar (Ø 32 und Ø 40), 0,3 bar (Ø 50) |
Temp. range |
-10 °C to +80 °C |
Design |
Screwed joint between stainless steel barrel and heads |
Piston rod |
C45 steel, hard chrome-plated |
Pipe |
Anodised aluminium |
Piston |
Technopolymer |
Sealant |
NBR |
Description
Version with magnetic piston
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Ø piston | Stroke (mm) |
Connection | Thread piston rod |
---|---|---|---|---|
K- 07 15 17 29 | 32 mm | 25 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 30 | 32 mm | 50 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 31 | 32 mm | 80 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 32 | 32 mm | 100 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 33 | 32 mm | 125 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 34 | 32 mm | 160 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 35 | 32 mm | 200 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 36 | 32 mm | 250 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 37 | 32 mm | 320 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 38 | 32 mm | 400 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 39 | 32 mm | 500 | G 1/8 | M 10 x 1.25 |
K- 07 15 17 40 | 40 mm | 25 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 41 | 40 mm | 50 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 42 | 40 mm | 80 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 43 | 40 mm | 100 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 44 | 40 mm | 125 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 45 | 40 mm | 160 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 46 | 40 mm | 200 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 47 | 40 mm | 250 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 48 | 40 mm | 320 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 49 | 40 mm | 400 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 50 | 40 mm | 500 | G 1/4 | M 12 x 1.25 |
K- 07 15 17 51 | 50 mm | 25 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 52 | 50 mm | 50 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 53 | 50 mm | 80 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 54 | 50 mm | 100 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 55 | 50 mm | 125 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 56 | 50 mm | 160 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 57 | 50 mm | 200 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 58 | 50 mm | 250 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 59 | 50 mm | 320 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 60 | 50 mm | 400 | G 1/4 | M 16 x 1.5 |
K- 07 15 17 61 | 50 mm | 500 | G 1/4 | M 16 x 1.5 |
Additional information
![](/images/up.gif)
Important: The scope of supply does not include a connector. Please order separately.
Note: 500 mm is the maximum stroke available for the double-acting type.
Ordering information
Note: 500 mm is the maximum stroke available for the double-acting type.
Accessories
![](/images/up.gif)
- K-FUSSBEFESTIGUNG 2
- Foot model
- K-KOPFMUTTER DECKEL BODEN
- Hexagon nut (for head)
- K-GABELKOEPFE 4
- Fork model
- K-GELENKAUGEN 5
- Rod eye model
- K-SCHWENKLAGER 2
- Counter-hinge model
- K-SENSORHALTER
- Sensor support (with T-slot adapter)
- K-SENSOREN T-NUT 1
- Sensor for T-slot
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.